User Tools

Site Tools


2ghackedmassettings

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
2ghackedmassettings [2008/01/24 07:22]
twdorris
2ghackedmassettings [2011/06/07 06:56] (current)
twdorris
Line 2: Line 2:
  
 If you remove both side honeycombs and the one lower honeycomb (leaving the center in place) on a 2G MAF, you need to adjust for this in the MAF compensation dialog in DSMLink. ​ The table below lists the values you would use for a typical setup. ​ Note for 1G guys that you will need to select "2G MAF" as your base MAF type first. ​ The following compensation values are based on the assumption that the ECU is configured for a 2G MAF. If you remove both side honeycombs and the one lower honeycomb (leaving the center in place) on a 2G MAF, you need to adjust for this in the MAF compensation dialog in DSMLink. ​ The table below lists the values you would use for a typical setup. ​ Note for 1G guys that you will need to select "2G MAF" as your base MAF type first. ​ The following compensation values are based on the assumption that the ECU is configured for a 2G MAF.
 +
 +**V3 NOTE:** If you're running the V3 laptop application (as everyone should be...even if you've got a V2 ECU), then the following information is completely irrelevant because the V3 application includes a "​hacked MAF" template you can use instead.
  
 ====== Details ====== ====== Details ======
2ghackedmassettings.txt ยท Last modified: 2011/06/07 06:56 by twdorris