User Tools

Site Tools


baseinjectordata

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
baseinjectordata [2009/08/21 17:18]
gamble
baseinjectordata [2024/03/15 11:16] (current)
Line 3: Line 3:
 These values were gathered from various sources. ​ These may not match exactly with the values you've seen elsewhere, but they should be fairly close. ​ The problem is that each injector can behave a little differently from another of the same size and manufacturer. ​ So there'​s some variation that simply can't be accounted for in all cases. ​ Start with the values listed below and fine tune from there. These values were gathered from various sources. ​ These may not match exactly with the values you've seen elsewhere, but they should be fairly close. ​ The problem is that each injector can behave a little differently from another of the same size and manufacturer. ​ So there'​s some variation that simply can't be accounted for in all cases. ​ Start with the values listed below and fine tune from there.
  
-All of these values assume stock base fuel pressure (37psi for 1Gs and 43.for 2Gs).  Deadtime is listed as an adjustment to be entered into the ECMLink application,​ which is then applied on top of the calculated stock adjustment. ​ For more details on how to adjust for varying fuel pressure or how to use the fuel adjustment tab in ECMLink, see the [[fuelsettingshelp|Fuel Settings page]].+All of these values assume stock base fuel pressure (37psi for 1Gs and 42.for 2Gs).  Deadtime is listed as an adjustment to be entered into the ECMLink application,​ which is then applied on top of the calculated stock adjustment. ​ For more details on how to adjust for varying fuel pressure or how to use the fuel adjustment tab in ECMLink, see the [[fuelsettingshelp|Fuel Settings page]].
  
  
Line 27: Line 27:
 |PTE / Delphi ​              ​| ​      ​1000| ​        ​-51| ​             450|Modified GM Rochester 17113744 injector. Actual flow: 940cc| |PTE / Delphi ​              ​| ​      ​1000| ​        ​-51| ​             450|Modified GM Rochester 17113744 injector. Actual flow: 940cc|
 |RC                         ​| ​       550|         ​-18| ​             180| | |RC                         ​| ​       550|         ​-18| ​             180| |
 +
  
  
Line 52: Line 53:
 |660cc |36.89 lbs/​min |29.51 lbs/min | Not a good idea | |660cc |36.89 lbs/​min |29.51 lbs/min | Not a good idea |
 |680cc |38.01 lbs/​min |30.41 lbs/​min |Not a good idea  | |680cc |38.01 lbs/​min |30.41 lbs/​min |Not a good idea  |
-|720cc |40.24 lbs/​min |32.20 lbs/min |-18.75%| +|720cc |40.24 lbs/​min |32.20 lbs/min |-6.9%| 
-|750cc |41.92 lbs/​min |33.54 lbs/min |-22.00%| +|750cc |41.92 lbs/​min |33.54 lbs/min |-10.6%| 
-|780cc |43.60 lbs/​min |34.88 lbs/min |-25.00%| +|780cc |43.60 lbs/​min |34.88 lbs/min |-10.4%| 
-|850cc |47.51 lbs/​min |38.01 lbs/min |-31.18%| +|850cc |47.51 lbs/​min |38.01 lbs/min |-21.1%| 
-|880cc |49.19 lbs/​min |39.35 lbs/min |-33.52%| +|880cc |49.19 lbs/​min |39.35 lbs/min |-20.2%| 
-|950cc |53.10 lbs/​min |42.48 lbs/min |-38.42%| +|950cc |53.10 lbs/​min |42.48 lbs/min |-29.4%| 
-|1000cc |55.89 lbs/​min |44.72 lbs/min |-41.50%| +|1000cc |55.89 lbs/​min |44.72 lbs/min |-33.0%| 
-|1150cc |64.28 lbs/​min |51.42 ​ lbs/min |-49.13%| +|1150cc |64.28 lbs/​min |51.42 ​ lbs/min |-41.7%| 
-|1200cc |67.07 lbs/​min |53.66 lbs/min |-51.25%| +|1200cc |67.07 lbs/​min |53.66 lbs/min |-44.1%| 
-|1600cc |89.43 lbs/​min |71.55 lbs/min |-63.44%| +|1600cc |89.43 lbs/​min |71.55 lbs/min |-58.1%| 
-|1850cc |103.41 lbs/​min |82.72 lbs/min |-68.38%|+|1850cc |103.41 lbs/​min |82.72 lbs/min |-63.8%|
  
  
baseinjectordata.1250889486.txt.gz · Last modified: 2009/08/21 17:18 by gamble