ECMTuning - wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

<h1>Adjusting for injector size</h1> <div class="level1"> <p> First, the basic process of adjusting DSMLink for different injectors is simple. You simply use the ECU→Fuel dialog to adjust the global fuel slider and deadtime value. The <a href="/wiki/doku.php?id=baseinjectordata" class="wikilink1" title="baseinjectordata">Injector Data Compilation</a> page contains a handy list of starting points to use. The DSMLink user's manual also includes a large section on injector compensation. If you haven't already read that, <b>please</b> do so now. It contains a lot of information I just don't want to repeat here, like how to adjust those basic global fuel slider values for non-stock base fuel pressure. </p> <p> Once you've made this basic adjustment, you can fine tune from there by watching fuel trims (LTFT) while idling and cruising. Again, the user's guide provides details on this process. Once idle and cruise are about where you want it, you can then focus on wide open throttle tuning by watching measured A/F ratio using a wideband and comparing against the estimated A/F Ratio provided by DSMLink. More details on the estimated A/F Ratio item can be found on the <a href="/wiki/doku.php?id=afratioitem" class="wikilink1" title="afratioitem">Estimated A/F Ratio</a> page. </p> </div> <h2>2G special consideration</h2> <div class="level2"> <p> The current V1 and V2 2G offering only records the changes you make in battery-backed RAM. When the ECU loses battery power, the DSMLink settings reset back to whatever settings were specified on the original order form for that chip. You can, of course, always restore the ECU settings back to what you lasted save via the ECU→Load/Save menu. But, if you're making a large change to injectors on your car, you may want to <a href="mailto:twdorris@ecmtuning.com?subject=DSMLink chip request" class="mail" title="twdorris@ecmtuning.com?subject=DSMLink chip request">contact us</a> to request a new chip with settings that more closely match your new configuration. </p> </div>