blownsensorground
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
blownsensorground [2009/10/20 09:51] twdorris |
blownsensorground [2024/03/15 11:16] (current) |
||
|---|---|---|---|
| Line 8: | Line 8: | ||
| Sensor ground is pin 92 on a 2G DSM ECU and pins 17 and 24 on a 1G DSM ECU. | Sensor ground is pin 92 on a 2G DSM ECU and pins 17 and 24 on a 1G DSM ECU. | ||
| + | |||
| Line 17: | Line 18: | ||
| If you repair this yourself, be sure to scrape the green solder mask and white silk screen from the board to reveal bare copper before soldering. | If you repair this yourself, be sure to scrape the green solder mask and white silk screen from the board to reveal bare copper before soldering. | ||
| - | {{http://www.dsmlink.com/images/forums/snsrgnd.jpg}} | + | {{https://www.ecmtuning.com/images/forums/snsrgnd.jpg}} |
| - | For a 1G ECU, the symptoms are the same, but the burned track can be on the top of the board connecting to ECU pin 24 or on the bottom of the board in the are beneath IC101. | + | For a 1G ECU, the symptoms are the same, but the burned track can be on the top of the board connecting to ECU pin 24 or on the bottom of the board in the area beneath IC101. |
blownsensorground.txt ยท Last modified: 2024/03/15 11:16 (external edit)
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
