User Tools

Site Tools


blownsensorground

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
blownsensorground [2009/10/20 09:51]
twdorris
blownsensorground [2009/10/27 13:40] (current)
twdorris
Line 8: Line 8:
  
 Sensor ground is pin 92 on a 2G DSM ECU and pins 17 and 24 on a 1G DSM ECU. Sensor ground is pin 92 on a 2G DSM ECU and pins 17 and 24 on a 1G DSM ECU.
 +
  
  
Line 19: Line 20:
 {{http://​www.dsmlink.com/​images/​forums/​snsrgnd.jpg}} {{http://​www.dsmlink.com/​images/​forums/​snsrgnd.jpg}}
  
-For a 1G ECU, the symptoms are the same, but the burned track can be on the top of the board connecting to ECU pin 24 or on the bottom of the board in the are beneath IC101.+For a 1G ECU, the symptoms are the same, but the burned track can be on the top of the board connecting to ECU pin 24 or on the bottom of the board in the area beneath IC101.
  
  
  
blownsensorground.txt ยท Last modified: 2009/10/27 13:40 by twdorris