User Tools

Site Tools


clutchcutwire

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
clutchcutwire [2009/06/18 10:19]
dmertz spelling
clutchcutwire [2011/03/23 08:21] (current)
twdorris
Line 8: Line 8:
  
 Our clutch cut wire is not compatible with the 1990 model year DSM.  We apologize for this, but there are some simple solutions presented on our [[90clutchcut|90 Clutch Cut]] page. Our clutch cut wire is not compatible with the 1990 model year DSM.  We apologize for this, but there are some simple solutions presented on our [[90clutchcut|90 Clutch Cut]] page.
 +
  
  
 ===== Running a straight wire ===== ===== Running a straight wire =====
  
-If you do not have cruise control in your car or you do not care about the cruise disable function when you press the clutch pedal in, then you can actually install a straight wire between the clutch switch and the ECU.  The ECU/ECMLink just wants to see a switch to ground on the ECU input. So cut the wire that normally runs to the cruise control ECU and run a wire from there directly to the ECU input instead. Check all this with a meter, of course, but once that's done, you should be set. +If you do not have cruise control in your car or you do not care about the cruise disable function when you press the clutch pedal in, then you can actually install a straight wire between the clutch switch and the ECU.  The ECU/ECMLink just wants to see a switch to ground on the ECU input. So cut the wire that normally runs to the cruise control ECU and run a wire from there (switch side) directly to the ECU input instead. Check all this with a meter, of course, but once that's done, you should be set. 
  
 Pin out information can be found on our [[ecuwiringinformation|ECU Wiring Page]]. ​ You can also find clutch cut wiring installation instructions on our [[http://​www.ecmtuning.com/​downloads.php|Downloads Page]]. ​ The clutch cut wiring instructions on our downloads page explains which wire to cut if you plan to run a straight wire to the ECU.  On a 2G DSM, it's a black wire with a red stripe on the clutch switch. ​ On a 1991-1994 DSM, it's a green wire with a black stripe. Pin out information can be found on our [[ecuwiringinformation|ECU Wiring Page]]. ​ You can also find clutch cut wiring installation instructions on our [[http://​www.ecmtuning.com/​downloads.php|Downloads Page]]. ​ The clutch cut wiring instructions on our downloads page explains which wire to cut if you plan to run a straight wire to the ECU.  On a 2G DSM, it's a black wire with a red stripe on the clutch switch. ​ On a 1991-1994 DSM, it's a green wire with a black stripe.
clutchcutwire.txt ยท Last modified: 2011/03/23 08:21 by twdorris