User Tools

Site Tools


diagport-12pin

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision Both sides next revision
diagport-12pin [2009/11/16 07:41]
twdorris
diagport-12pin [2009/11/16 08:41]
twdorris
Line 4: Line 4:
 The following 3 wires are the wires used by the ECMLink datalogging cable. The following 3 wires are the wires used by the ECMLink datalogging cable.
  
-{{  http://​www.ecmtuning.com/​images/​forums/​diagport1g.png ​ }} \\+{{  http://​www.ecmtuning.com/​images/​forums/ecudocs/​diagport1g.png ​ }} \\
 The "front side" view is looking at the diagnostic connector in the car with the male pins pointing out at you.  The "​reverse side" view is looking at the connector end of our cable (looking "​into"​ the female sockets). The "front side" view is looking at the diagnostic connector in the car with the male pins pointing out at you.  The "​reverse side" view is looking at the connector end of our cable (looking "​into"​ the female sockets).
  
Line 15: Line 15:
 For a 1G DSM ECU, pin 1 of the diagnostic connector should connect with pin 1 on the ECU.  Pin 10 of the diagnostic connector should connect with pin 2 on the ECU.  For 1G DSM ECU wiring information,​ view the [[http://​www.dsmlink.com/​images/​forums/​1GECUPinout.pdf|1G ECU Pinout]] document found on our [[ecuwiringinformation|ECU wiring page]]. For a 1G DSM ECU, pin 1 of the diagnostic connector should connect with pin 1 on the ECU.  Pin 10 of the diagnostic connector should connect with pin 2 on the ECU.  For 1G DSM ECU wiring information,​ view the [[http://​www.dsmlink.com/​images/​forums/​1GECUPinout.pdf|1G ECU Pinout]] document found on our [[ecuwiringinformation|ECU wiring page]].
  
 +For an EVO1-3 ECU, pin 1 of the diagnostic connector should connect with pin 42 on the ECU.  Pin 10 of the diagnostic connector should connect with pin 43 on the ECU.
diagport-12pin.txt ยท Last modified: 2024/03/15 11:16 (external edit)