direct_access_changes
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
direct_access_changes [2016/10/30 06:35] twdorris [Single value files] |
direct_access_changes [2024/03/15 11:16] (current) |
||
|---|---|---|---|
| Line 15: | Line 15: | ||
| - | __Windows Vista/Windows 7:__ \\ | + | __Windows Vista/Windows 7/8/10:__ \\ |
| C:\Users\<username>\ecmlink\resources\records | C:\Users\<username>\ecmlink\resources\records | ||
| Line 38: | Line 38: | ||
| - | //(You may need to right-click on the file and select "Save link as" to download these files to your computer)// | + | //(You may need to **right-click** on the file and select "Save link as" to download these files to your computer)// |
| Line 49: | Line 49: | ||
| |"VTEC" disable |{{:novtece3.properties|novtece3.properties}} |The early EVO ECUs have a "special" mode of operation above 5500 RPM at full throttle where the ECU kicks in a slightly lean mixture while simultaneously bumping up the boost target and base WGS duty cycle. For lack of a better name, we're jokingly referring to this as a factory "VTEC" mode. You can disable this operation by setting the value in this table to 0. Set the value to 1 to enable it. (EVO1-3 only) | | |"VTEC" disable |{{:novtece3.properties|novtece3.properties}} |The early EVO ECUs have a "special" mode of operation above 5500 RPM at full throttle where the ECU kicks in a slightly lean mixture while simultaneously bumping up the boost target and base WGS duty cycle. For lack of a better name, we're jokingly referring to this as a factory "VTEC" mode. You can disable this operation by setting the value in this table to 0. Set the value to 1 to enable it. (EVO1-3 only) | | ||
| + | |||
| + | \\ | ||
| ===== Single value files ===== | ===== Single value files ===== | ||
| Line 56: | Line 58: | ||
| - | //(You may need to right-click on the file and select "Save link as" to download these files to your computer)// | + | //(You may need to **right-click** on the file and select "Save link as" to download these files to your computer)// |
| Line 73: | Line 75: | ||
| - | {{ :direct-access-code-mod.png?direct&185x63}}Each cell value you enter must match the value in the header above that cell. An example is provided to the right. Each cell value is identical to the header above it. | + | {{ :direct-access-code-mod.png?direct&185x63}}Each cell value you enter must match the value in the header above that cell. An example is provided to the right. Each cell value is identical to the header above it. Use the "reset to stock" button in ECMLink to revert back to the original values if you want to "undo" one of these features. |
| EDIT CAREFULLY AND __DOUBLE CHECK__ THE VALUES YOU ENTER BEFORE HITTING THE SAVE-TO-ECU BUTTON!! You have been warned. | EDIT CAREFULLY AND __DOUBLE CHECK__ THE VALUES YOU ENTER BEFORE HITTING THE SAVE-TO-ECU BUTTON!! You have been warned. | ||
| + | |||
| + | |||
| + | //(You may need to **right-click** on the file and select "Save link as" to download these files to your computer)// | ||
direct_access_changes.1477823731.txt.gz ยท Last modified: 2016/10/30 06:35 by twdorris
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
