dsmlinktpsadjustment
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | Next revision Both sides next revision | ||
|
dsmlinktpsadjustment [2009/05/04 10:41] dmertz |
dsmlinktpsadjustment [2009/05/04 10:43] dmertz |
||
|---|---|---|---|
| Line 6: | Line 6: | ||
| ====== Details ====== | ====== Details ====== | ||
| - | To adjust what the ECU sees, you can use the TPS Adjustment dialog. Start by setting the TPS offset to 0 and the scale to 100%. Then datalog RawThrotPos. That value is the real value datalogged from the ECU when you display TPSVolts or ThrotPos. Move the throttle from fully closed to fully open. Note the RawThrotPos at each point (fully closed and fully open) as follows. | + | To adjust what the ECU sees, you can use the TPS Adjustment dialog. Start by disabling TPS adjustments. Then datalog RawThrotPos. That value is the real value datalogged from the ECU when you display TPSVolts or ThrotPos. Move the throttle from fully closed to fully open. Note the RawThrotPos at each point (fully closed and fully open) as follows. |
| Vc = RawThrotPos when throttle closed | Vc = RawThrotPos when throttle closed | ||
| Line 17: | Line 17: | ||
| Note that Scale will be a number like 1.05 indicating 105% in the DSMLink TPS dialog. | Note that Scale will be a number like 1.05 indicating 105% in the DSMLink TPS dialog. | ||
| + | |||
| + | Lastly, enable TPS adjustments and enter the offset and scale values. | ||
dsmlinktpsadjustment.txt ยท Last modified: 2024/03/15 11:16 (external edit)
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
