User Tools

Site Tools


ecmlink101datalogging

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
ecmlink101datalogging [2009/05/14 09:26]
twdorris
ecmlink101datalogging [2009/05/28 07:47] (current)
twdorris
Line 32: Line 32:
  
 You tell the ECU what to send by using the Edit->​Captured values (F10) dialog. ​ When ECMLink connects to the ECU, it asks the ECU for a list of what it is currently configured to log.  You then use the captured values dialog to change that list. You tell the ECU what to send by using the Edit->​Captured values (F10) dialog. ​ When ECMLink connects to the ECU, it asks the ECU for a list of what it is currently configured to log.  You then use the captured values dialog to change that list.
 +
  
 ==== Showing items on the screen ==== ==== Showing items on the screen ====
Line 37: Line 38:
 You may not always want to display every value captured from the ECU.  You might capture 20 different items, but only be interested in seeing 10 particular items on your graph at one time (possibly to reduce screen space or reduce clutter in the graph, for example). ​ You can configure what will be displayed on the graph using the Edit->​Display values (F9) dialog. ​ This menu item only works while viewing a datalog tab. You may not always want to display every value captured from the ECU.  You might capture 20 different items, but only be interested in seeing 10 particular items on your graph at one time (possibly to reduce screen space or reduce clutter in the graph, for example). ​ You can configure what will be displayed on the graph using the Edit->​Display values (F9) dialog. ​ This menu item only works while viewing a datalog tab.
  
-The display values dialog will present you with a list of what can be display ​given the current set of things captured from the ECU.  If you want to display a value that's not listed in the display values dialog, then you'll need to first tell the ECU to log that value. ​ You do that using the Edit->​Captured values (F10) dialog as described above.+The display values dialog will present you with a list of what can be displayed ​given the current set of things captured from the ECU.  If you want to display a value that's not listed in the display values dialog, then you'll need to first tell the ECU to log that value. ​ You do that using the Edit->​Captured values (F10) dialog as described above.
  
  
ecmlink101datalogging.txt ยท Last modified: 2009/05/28 07:47 by twdorris