User Tools

Site Tools


ecmlinkordering

This is an old revision of the document!


Basic Ordering Process

Ordering ECMLink is really very simple. But to a completely new user, it can be a little confusing if you don't understand the terminology and process already.

Supported ECUs

ECMLink installs inside your car's computer (ECU). ECMLink supports the 1990-1997 DSM ECUs. You can run ECMLink in a 98-99 DSM, you just have to replace the ECU as described on the use_ecmlink_in_98_99_dsm page.

The ECU needs to either be an EPROM model ECU or, if it's not, then the ECU will need to be converted from non-EPROM to EPROM in order to run ECMLink.

There are ordering options on the main product pages to allow you to specify whether you need the non-EPROM conversion or not.

To tell if your ECU is non-EPROM or EPROM, refer to this page. You can get some more detailed information off the EPROM ID page.

ECMLink also supports the early 1992-1995 EVO1-3 ECUs. Luckily for the EVO1-3 guys, all these ECUs are EPROM ECUs.

Ordering steps

  1. EPROM ECU: Once you have confirmed that your ECU is an EPROM model, you'll need to check that the EPROM is removable. Our Socket ID page contains all the information you need to know about this. If you need us to socket the ECU, simply select the socketing option at the bottom of the ECMLink product page you're interested in (Full V3 or V3Lite).
  2. non-EPROM ECU: If your ECU is not an EPROM model ECU, but it *is* a 1990-1997 DSM ECU, then we can do a non-EPROM conversion for you instead of the regular socket service. In that case, you just select an appropriate non-EPROM conversion option on the main product ordering page instead of selecting socketing service.
  3. PLACING THE ORDER: At this point, you should know whether you have an EPROM ECU or not and you should know whether you need us to socket that ECU or not. You should be ready to fill out the order form (Full V3 or V3Lite). Be sure to select the socket service option if you intend to send the ECU in for socket work. If you still have questions, go ahead and contact us.
  4. AFTER THE ORDER: After your order is placed, your next step will depend on whether you need to send us your ECU for work or not. If you need us to socket the ECU (or do the non-EPROM conversion on it), then wait for our reply to your order with final instructions. We'll include all the shipping details you need. If you do not need us to socket your ECU, then we will ship your order out as quickly as possible.
ecmlinkordering.1390219247.txt.gz · Last modified: 2014/01/20 07:00 by twdorris