This shows you the differences between two versions of the page.
Both sides previous revision Previous revision | Next revision Both sides next revision | ||
ethanolsupport [2014/06/05 09:14] twdorris [Calculating global fuel scale] |
ethanolsupport [2014/06/05 09:15] twdorris [Log values] |
||
---|---|---|---|
Line 74: | Line 74: | ||
^Log parameter ^Description | | ^Log parameter ^Description | | ||
- | |**FlexFreq** |Displays the sampled freqeuncy from the ethanol sensor. | | + | |**FlexFreq** |Displays the sampled frequency from the ethanol sensor. | |
|**FlexEthMix** |Displays the ethanol content reported from the sensor as a percentage. A number like 85% indicates an 85% concentration of ethanol in the fuel. | | |**FlexEthMix** |Displays the ethanol content reported from the sensor as a percentage. A number like 85% indicates an 85% concentration of ethanol in the fuel. | | ||
|**FlexOctWeight** |Displays the weighting given to the MaxOct tables based on ethanol content. A value of 100% means the MaxOct table is being used exclusively with no influence from the MinOct tables. A value of 50% means the MinOct and MaxOct tables are being averaged equally. | | |**FlexOctWeight** |Displays the weighting given to the MaxOct tables based on ethanol content. A value of 100% means the MaxOct table is being used exclusively with no influence from the MinOct tables. A value of 50% means the MinOct and MaxOct tables are being averaged equally. | | ||
- | |**FlexFuelAdj** |Displays the amount of fuel adjusment to be applied based on ethanol content and the ECU's configuration. A value of 0% would mean that no ethanol-related enrichment is being applied. A value of 50% means a 50% ethanol-related enrichment will be applied in the final injector pulsewidth calculation. Typical values for FlexFuelAdj are somehwere from around 6% for E10 and maybe 55% for E85. But this all depends on other parameters described below. | | + | |**FlexFuelAdj** |Displays the amount of fuel adjustment to be applied based on ethanol content and the ECU's configuration. A value of 0% would mean that no ethanol-related enrichment is being applied. A value of 50% means a 50% ethanol-related enrichment will be applied in the final injector pulse width calculation. Typical values for FlexFuelAdj are somewhere from around 6% for E10 and maybe 55% for E85. But this all depends on other parameters described below. | |
+ | |||
+ | \\ | ||
==== Settings ==== | ==== Settings ==== |