evo8v3settings
Differences
This shows you the differences between two versions of the page.
|
evo8v3settings [2014/10/23 07:16] twdorris [EVO8 MAF] |
evo8v3settings [2024/03/15 11:16] |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | ====== EVO8 V3 and V3Lite Settings ====== | ||
| - | If you're looking to run a set of stock EVO8 injectors or an EVO8 MAF with your V3 ECMLink or V3Lite setup, this page contains the information you'll need to adjust the ECMLink configuration to match. All of this data was pulled directly from the EVO8 ECU, so it's dead on accurate. I run these files in my own EVO8 (using various DSM and EVO1-3 ECUs) and the settings are 100% accurate with fuel trims hoovering around 0%. | ||
| - | |||
| - | ===== EVO8 injectors ===== | ||
| - | If you're running EVO8 injectors with your ECMLink-equipped ECU, here are some numbers you can use to get the ECU configured to match identically with the EVO8 ECU itself. | ||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | |||
| - | ==== Fuel Adjustments Table ==== | ||
| - | In "ECU config" on the "Fuel" tab, set Global fuel to **-20.3%** and then set deadtime to 0 usecs. This assume you're running stock fuel pressure for your ECU. If you're running a 1G DSM ECU, that means 37 psi. If you're running any other ECU, that means 42.6 psi. If you're running a non-stock fuel pressure, you'll need to adjust the global fuel scale [[fuelsettingshelp|accordingly]]. | ||
| - | |||
| - | |||
| - | |||
| - | ==== InjBatteryAdj ==== | ||
| - | In the InjBatteryAdj table in direct access, set the table like so: | ||
| - | |||
| - | ^Volts^usecs^ | ||
| - | | 7| 2295| | ||
| - | | 9| 1400| | ||
| - | | 12| 890| | ||
| - | | 14| 690| | ||
| - | | 16| 555| | ||
| - | | 19| 495| | ||
| - | |||
| - | |||
| - | |||
| - | |||
| - | ===== EVO8 MAF ===== | ||
| - | |||
| - | |||
| - | You can simply select "EVO8/3G MAF" as your Base MAF type on the MAFComp tab and zero out any MAFComp adjustments you had in place previously. That's all there is to do. | ||
| - | |||
| - | ===== EVO8 timing and fuel maps ===== | ||
| - | New Direct Access tables that drop into place in ECMLink to provide exact copies of the EVO8 tables. | ||
| - | |||
| - | ^Platform^V3 File^V3Lite File^Desc^ | ||
| - | |2003 USDM EVO8 |[[http://www.ecmtuning.com/images/forums/v3configs/EVO8-2003-stock.eda|EVO8-2003-stock]] |[[http://www.ecmtuning.com/images/forums/v3configs/EVO8-2003-stock-v3lite.eda|EVO8-2003-stock]] |Bone stock 2003 EVO8 - my own car | | ||
| - | |2003 USDM EVO8 (mod1) |[[http://www.ecmtuning.com/images/forums/v3configs/EVO8-2003-mod1.eda|EVO8-2003-mod1]] |[[http://www.ecmtuning.com/images/forums/v3configs/EVO8-2003-mod1-v3lite.eda|EVO8-2003-mod1]] |A slightly modified version of the 2003 EVO8 map that works a bit better on high boost/quick spool cars. | | ||
| - | |2004 EVO8 GSR Ralliart |[[http://www.ecmtuning.com/images/forums/v3configs/EVO8-2004-GSR-Ralliart.eda|EVO8-2004-GSR-Ralliart]] |[[http://www.ecmtuning.com/images/forums/v3configs/EVO8-2004-GSR-Ralliart-v3lite.eda|EVO8-2004-GSR-Ralliart]] |A rather aggressive tune. Review first! | | ||
evo8v3settings.txt · Last modified: 2024/03/15 11:16 (external edit)
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
