ECMTuning - wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

<h1>EVO8 V3 and V3Lite Settings</h1> <div class="level1"> <p> If you're looking to run a set of stock EVO8 injectors or an EVO8 MAF with your V3 ECMLink or V3Lite setup, this page contains the information you'll need to adjust the ECMLink configuration to match. All of this data was pulled directly from the EVO8 ECU, so it's dead on accurate. I run these files in my own EVO8 (using various DSM and EVO1-3 ECUs) and the settings are 100% accurate with fuel trims hoovering around 0%. </p> </div> <h2>EVO8 injectors</h2> <div class="level2"> <p> If you're running EVO8 injectors with your ECMLink-equipped ECU, here are some numbers you can use to get the ECU configured to match identically with the EVO8 ECU itself. </p> </div> <h3>Fuel Adjustments Table</h3> <div class="level3"> <p> In "ECU config" on the "Fuel" tab, set Global fuel to -17.6% if you're running a 2G DSM ECU or -23% if you're running a 1G DSM ECU and then set deadtime to 0 usecs. </p> </div> <h3>InjBatteryAdj</h3> <div class="level3"> <p> In the InjBatteryAdj table in direct access, set the table like so: </p> <span class='np_break'> </span> <div class="table"><table class="inline"> <thead> <tr class="row0"> <th class="col0">Volts</th><th class="col1">usecs</th> </tr> </thead> <tr class="row1"> <td class="rightalign"> 7</td><td class="rightalign"> 2235</td> </tr> <tr class="row2"> <td class="rightalign"> 9</td><td class="rightalign"> 1380</td> </tr> <tr class="row3"> <td class="rightalign"> 12</td><td class="rightalign"> 900</td> </tr> <tr class="row4"> <td class="rightalign"> 14</td><td class="rightalign"> 570</td> </tr> <tr class="row5"> <td class="rightalign"> 16</td><td class="rightalign"> 345</td> </tr> <tr class="row6"> <td class="rightalign"> 19</td><td class="rightalign"> 195</td> </tr> </table> <span class='np_break'> </span> </div> </div> <h2>EVO8 MAF</h2> <div class="level2"> <p> For the full V3 package, you can simply select "EVO8/3G MAF" as your Base MAF type on the MAFComp tab and zero out any MAFComp adjustments you had in place previously. That's all there is to do on the full V3 package. </p> <p> For V3Lite, you need to replace each of the underlying base MAF tables yourself because V3Lite does not include MAFComp functionality. This isn't hard to do, though. Just load the following file into the ECMLink application and hit "Copy all to ECU". That's about it. </p> <p> <a href="http://www.ecmtuning.com/images/forums/v3configs/EVO8-stock-MAF-v3lite.eda" class="urlextern" title="http://www.ecmtuning.com/images/forums/v3configs/EVO8-stock-MAF-v3lite.eda" rel="nofollow">EVO8-stock-MAF-v3lite.eda</a> </p> </div> <h2>EVO8 timing and fuel maps</h2> <div class="level2"> <p> New Direct Access tables that drop into place in ECMLink to provide exact copies of the EVO8 tables. </p> <span class='np_break'> </span> <div class="table"><table class="inline"> <thead> <tr class="row0"> <th class="col0">Platform</th><th class="col1">V3 File</th><th class="col2">V3Lite File</th><th class="col3">Desc</th> </tr> </thead> <tr class="row1"> <td class="leftalign">2003 USDM EVO8 </td><td class="leftalign"><a href="http://www.ecmtuning.com/images/forums/v3configs/EVO8-2003-stock.eda" class="urlextern" title="http://www.ecmtuning.com/images/forums/v3configs/EVO8-2003-stock.eda" rel="nofollow">EVO8-2003-stock</a> </td><td class="leftalign"><a href="http://www.ecmtuning.com/images/forums/v3configs/EVO8-2003-stock-v3lite.eda" class="urlextern" title="http://www.ecmtuning.com/images/forums/v3configs/EVO8-2003-stock-v3lite.eda" rel="nofollow">EVO8-2003-stock</a> </td><td class="leftalign">Bone stock 2003 EVO8 - my own car </td> </tr> <tr class="row2"> <td class="leftalign">2003 USDM EVO8 (mod1) </td><td class="leftalign"><a href="http://www.ecmtuning.com/images/forums/v3configs/EVO8-2003-mod1.eda" class="urlextern" title="http://www.ecmtuning.com/images/forums/v3configs/EVO8-2003-mod1.eda" rel="nofollow">EVO8-2003-mod1</a> </td><td class="leftalign"><a href="http://www.ecmtuning.com/images/forums/v3configs/EVO8-2003-mod1-v3lite.eda" class="urlextern" title="http://www.ecmtuning.com/images/forums/v3configs/EVO8-2003-mod1-v3lite.eda" rel="nofollow">EVO8-2003-mod1</a> </td><td class="leftalign">A slightly modified version of the 2003 EVO8 map that works a bit better on high boost/quick spool cars. </td> </tr> <tr class="row3"> <td class="leftalign">2004 EVO8 GSR Ralliart </td><td class="leftalign"><a href="http://www.ecmtuning.com/images/forums/v3configs/EVO8-2004-GSR-Ralliart.eda" class="urlextern" title="http://www.ecmtuning.com/images/forums/v3configs/EVO8-2004-GSR-Ralliart.eda" rel="nofollow">EVO8-2004-GSR-Ralliart</a> </td><td class="leftalign"><a href="http://www.ecmtuning.com/images/forums/v3configs/EVO8-2004-GSR-Ralliart-v3lite.eda" class="urlextern" title="http://www.ecmtuning.com/images/forums/v3configs/EVO8-2004-GSR-Ralliart-v3lite.eda" rel="nofollow">EVO8-2004-GSR-Ralliart</a> </td><td class="leftalign">A rather aggressive tune. Review first! </td> </tr> </table> <span class='np_break'> </span> </div> </div>