User Tools

Site Tools


externalsensorinput

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
externalsensorinput [2010/03/02 05:46]
twdorris
externalsensorinput [2010/03/02 05:47]
twdorris
Line 26: Line 26:
   * IAT (ECU Pin 72) - **see IAT/Baro Notes below**   * IAT (ECU Pin 72) - **see IAT/Baro Notes below**
   * Coolant Temp Input (ECU Pin 83) - **(V3 only) - This will leave the car in "Open Loop"​.** ​  "​Lock Coolant Temp" must be selected, to work properly. ​ Use only as a last resort and only temporarily unless you fully understand the issues.   * Coolant Temp Input (ECU Pin 83) - **(V3 only) - This will leave the car in "Open Loop"​.** ​  "​Lock Coolant Temp" must be selected, to work properly. ​ Use only as a last resort and only temporarily unless you fully understand the issues.
 +
  
  
Line 33: Line 34:
   * Baro (ECU Pin 65) - **see IAT/Baro Notes below - Has internal pull down resistor making it unsuitable for certain sensors (see [[e3baroinputworkaround|work around]]).**   * Baro (ECU Pin 65) - **see IAT/Baro Notes below - Has internal pull down resistor making it unsuitable for certain sensors (see [[e3baroinputworkaround|work around]]).**
   * IAT (ECU Pin 52) - **see IAT/Baro Notes below**   * IAT (ECU Pin 52) - **see IAT/Baro Notes below**
-  * Coolant Temp Input (ECU Pin 63) - **This will leave the car in "Open Loop"​.** ​  "​Lock Coolant Temp" must be selected, to work properly.+  * Coolant Temp Input (ECU Pin 63) - **This will leave the car in "Open Loop"​.** ​  "​Lock Coolant Temp" must be selected, to work properly.  Use only as a last resort and only temporarily unless you fully understand the issues.
  
  
externalsensorinput.txt ยท Last modified: 2010/03/02 05:47 by twdorris