User Tools

Site Tools


externalsensorinput

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
externalsensorinput [2010/03/02 05:46]
twdorris
externalsensorinput [2024/03/15 11:16] (current)
Line 14: Line 14:
   * Front O2 (ECU Pin 4) - **Only usable when "Open Loop" option is selected (V2 or V3), or [[v3narrowbandsim|narrowband O2 simulation]] is enabled (V3 only).**   * Front O2 (ECU Pin 4) - **Only usable when "Open Loop" option is selected (V2 or V3), or [[v3narrowbandsim|narrowband O2 simulation]] is enabled (V3 only).**
   * Coolant Temp Input (ECU Pin 20) - **(V3 only) - This will leave the car in "Open Loop"​.** ​  "​Lock Coolant Temp" must be selected, to work properly. ​ Use only as a last resort and only temporarily unless you fully understand the issues.   * Coolant Temp Input (ECU Pin 20) - **(V3 only) - This will leave the car in "Open Loop"​.** ​  "​Lock Coolant Temp" must be selected, to work properly. ​ Use only as a last resort and only temporarily unless you fully understand the issues.
 +
  
  
Line 24: Line 25:
   * Baro (ECU Pin 85) - **see IAT/Baro Notes below - Has internal pull down resistor making it unsuitable for certain sensors (see [[2gBaroInputWorkaround|work around]]).**   * Baro (ECU Pin 85) - **see IAT/Baro Notes below - Has internal pull down resistor making it unsuitable for certain sensors (see [[2gBaroInputWorkaround|work around]]).**
   * IAT (ECU Pin 72) - **see IAT/Baro Notes below**   * IAT (ECU Pin 72) - **see IAT/Baro Notes below**
-  * Coolant Temp Input (ECU Pin 83) - **(V3 only) - This will leave the car in "Open Loop"​.** ​  "​Lock Coolant Temp" must be selected, to work properly.+  * Coolant Temp Input (ECU Pin 83) - **(V3 only) - This will leave the car in "Open Loop"​.** ​  "​Lock Coolant Temp" must be selected, to work properly. ​ Use only as a last resort and only temporarily unless you fully understand the issues. 
  
  
Line 32: Line 34:
   * Baro (ECU Pin 65) - **see IAT/Baro Notes below - Has internal pull down resistor making it unsuitable for certain sensors (see [[e3baroinputworkaround|work around]]).**   * Baro (ECU Pin 65) - **see IAT/Baro Notes below - Has internal pull down resistor making it unsuitable for certain sensors (see [[e3baroinputworkaround|work around]]).**
   * IAT (ECU Pin 52) - **see IAT/Baro Notes below**   * IAT (ECU Pin 52) - **see IAT/Baro Notes below**
-  * Coolant Temp Input (ECU Pin 63) - **This will leave the car in "Open Loop"​.** ​  "​Lock Coolant Temp" must be selected, to work properly.+  * Coolant Temp Input (ECU Pin 63) - **This will leave the car in "Open Loop"​.** ​  "​Lock Coolant Temp" must be selected, to work properly.  Use only as a last resort and only temporarily unless you fully understand the issues.
  
  
externalsensorinput.1267526810.txt.gz · Last modified: 2010/03/02 05:46 by twdorris