User Tools

Site Tools


externalsensorinstall

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
externalsensorinstall [2008/01/24 07:30]
twdorris
externalsensorinstall [2008/09/30 07:29] (current)
twdorris
Line 3: Line 3:
 The basic process for installing an external (aftermarket) sensor for datalogging use with DSMLink is pretty simple. ​ The details can get a little time consuming and tedious. ​ But the general idea is to do the following. The basic process for installing an external (aftermarket) sensor for datalogging use with DSMLink is pretty simple. ​ The details can get a little time consuming and tedious. ​ But the general idea is to do the following.
  
-  - Install new device/​sensor into vehicle per manufacturers ​instructions.+  - Install new device/​sensor into vehicle per manufacturer'​s ​instructions.
   - Locate/​determine device/​sensors analog output wire.   - Locate/​determine device/​sensors analog output wire.
   - Choose an available [[ExternalSensorInput|ECU input]] to which you will connect the sensor'​s output. ​ See the [[ECUWiringInformation|ECU wiring page]] for information on ECU connector pin numbers.   - Choose an available [[ExternalSensorInput|ECU input]] to which you will connect the sensor'​s output. ​ See the [[ECUWiringInformation|ECU wiring page]] for information on ECU connector pin numbers.
externalsensorinstall.txt ยท Last modified: 2008/09/30 07:29 by twdorris