ECMTuning - wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

<h1>Supported Aftermarket Sensors</h1> <div class="level1"> <p> The lists below detail which sensors the ECMLink application supports for datalogging. Others can be added fairly easily, but honestly doesn't happen all that often. The V3 application allows for user-defined sensors. The full process for defining 100% custom sensor display modules is not documented yet. But the process for logging custom linear sensors is documented on the <a href="/wiki/doku.php?id=linearitems" class="wikilink1" title="linearitems">linear items</a> page. This lets you log or tweak the logging of any linear wideband kit, boost or fuel pressure sensor. </p> </div> <h2>Wideband O2 kits</h2> <div class="level2"> <ul> <li class="level1"> AEM with and without gauge (please see <a href="/wiki/doku.php?id=aemwb" class="wikilink1" title="aemwb">our notes</a> on this kit!)</li> <li class="level1"> Dyno Jet</li> <li class="level1"> FJO</li> <li class="level1"> <a href="/wiki/doku.php?id=innovatelc1orlm1install" class="wikilink1" title="innovatelc1orlm1install">Innovate LM-1 & LC-1</a></li> <li class="level1"> PLX M-series</li> <li class="level1"> Techedge v1 and v2</li> <li class="level1"> Zeitronix ZT-2</li> <li class="level1"> NGK AFX</li> </ul> </div> <h2>Boost pressure sensors</h2> <div class="level2"> <ul> <li class="level1"> AVCR 3 and 4-bar</li> <li class="level1"> GM 3 and 3.3-bar (P/N info below)</li> <li class="level1"> AEM 3.5 and 5-bar</li> <li class="level1"> Apex'I EL series</li> <li class="level1"> Greddy 52mm and 60mm</li> <li class="level1"> Turbo XS sensors</li> </ul> </div> <h2>Miscellaneous</h2> <div class="level2"> <ul> <li class="level1 node"> Autometer fuel and oil pressure (sensor #2246)<ul> <li class="level2"> Note: this is apparently <a href="http://www.kavlico.com/pages/products_sensors/pressure_sensors/standard_designs1.htm#p265" class="urlextern" title="http://www.kavlico.com/pages/products_sensors/pressure_sensors/standard_designs1.htm#p265" rel="nofollow">Kavlico's P265 sensor</a>. Further discussion can be found on the Innovate Motorsports threads <a href="http://www.innovatemotorsports.com/forums/showthread.php?t=1108" class="urlextern" title="http://www.innovatemotorsports.com/forums/showthread.php?t=1108" rel="nofollow">here</a> and <a href="http://www.innovatemotorsports.com/forums/showthread.php?t=662" class="urlextern" title="http://www.innovatemotorsports.com/forums/showthread.php?t=662" rel="nofollow">here</a>.</li> </ul> </li> <li class="level1"> GM intake air temperaure (P/N info below)</li> <li class="level1"> MSD Air Intake Sensor #2320</li> <li class="level1"> Apex'I EL EGT</li> </ul> </div> <h2>Part number information</h2> <div class="level2"> <ul> <li class="level1"> GM Intake Air Temperature P/N 25036751, pig tail 12102620 <a href="http://www.gmpartsdirect.com/" class="urlextern" title="http://www.gmpartsdirect.com/" rel="nofollow">GM Parts Direct</a></li> <li class="level1"> GM 3-bar P/N 12223861, pig tail 15305891 <a href="http://www.gmpartsdirect.com/" class="urlextern" title="http://www.gmpartsdirect.com/" rel="nofollow">GM Parts Direct</a></li> <li class="level1"> GM 3.3-bar P/N 9373269, pig tail 88987997 <a href="http://www.gmpartsdirect.com/" class="urlextern" title="http://www.gmpartsdirect.com/" rel="nofollow">GM Parts Direct</a></li> </ul> <p> <b>GM Connectors</b> - If you need connectors or adapters, I really like <a href="http://www.eficonnection.com" class="urlextern" title="http://www.eficonnection.com" rel="nofollow">these guys</a>. </p> </div>