installnewsensor
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | |||
|
installnewsensor [2009/06/15 06:48] twdorris |
installnewsensor [2009/06/15 06:49] twdorris |
||
|---|---|---|---|
| Line 5: | Line 5: | ||
| - You start by installing the sensor according to the manufacturer's installation instructions. This will include running power and ground and whatever else the sensor needs to get. | - You start by installing the sensor according to the manufacturer's installation instructions. This will include running power and ground and whatever else the sensor needs to get. | ||
| - | - Once that's done and the sensor appears to be installed and working properly, you select an [[ExternalSensorInput|available input]] on the ECU to which you will connect the sensor's output. You disconnect the factory sensor that was providing signal data to the ECU on the selected line and then connect your new sensor's output instead. | + | - Once that's done and the sensor appears to be installed and working properly, you select an [[ExternalSensorInput|available input]] on the ECU to which you will connect the sensor's output. |
| + | - You disconnect the factory sensor that was providing signal data to the ECU on the selected line and then connect your new sensor's output instead. Locate the sensor's output from the manufacturer's installation instructions. You will be looking for a 0-5v analog output of some sort. | ||
| - Once that's done, go into the **ECU Inputs** tab and assign the sensor to an input pin for logging (be __sure__ to hit "Save Pin Assignments" after making a change to the pin assignments). Once you've done that, you can add the sensor to the ECU's list of things to log by pulling up the Captured Values dialog (F10). | - Once that's done, go into the **ECU Inputs** tab and assign the sensor to an input pin for logging (be __sure__ to hit "Save Pin Assignments" after making a change to the pin assignments). Once you've done that, you can add the sensor to the ECU's list of things to log by pulling up the Captured Values dialog (F10). | ||
installnewsensor.txt · Last modified: 2024/03/15 11:16 (external edit)
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
