User Tools

Site Tools


maftcalibrationbywbo2

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision Both sides next revision
maftcalibrationbywbo2 [2008/01/23 08:10]
76.100.119.159
maftcalibrationbywbo2 [2008/01/23 18:37]
DSMmaniac_Big_O A simple formula for calculting the adjustment amount need when using this technique for MAFT calibration
Line 55: Line 55:
  
 Example: If the fuel trim is at a constant +7%, add +7% to the 250 Hz slider in the airflow table. Repeat until you are happy. Example: If the fuel trim is at a constant +7%, add +7% to the 250 Hz slider in the airflow table. Repeat until you are happy.
 +
  
 ====== WOT Tuning (A/F Ratio, WBO2, & MAFRaw) 400hz, 800hz, 1200hz, 1600hz, 2000hz, 2400hz ====== ====== WOT Tuning (A/F Ratio, WBO2, & MAFRaw) 400hz, 800hz, 1200hz, 1600hz, 2000hz, 2400hz ======
Line 64: Line 65:
     * When A/F Ratio is leaner than WBO2 subtract airflow. OR when A/F Ratio is above WBO2 on the graph, subtract airflow to move A/F Ratio down. OR when you want less fuel, subtract airflow.     * When A/F Ratio is leaner than WBO2 subtract airflow. OR when A/F Ratio is above WBO2 on the graph, subtract airflow to move A/F Ratio down. OR when you want less fuel, subtract airflow.
     * For each 0.10 A/F Ratio is off, adjust by 1% airflow.     * For each 0.10 A/F Ratio is off, adjust by 1% airflow.
 +
  
 Example: You make a pull and you get the following results: Example: You make a pull and you get the following results:
Line 71: Line 73:
 | WBO2        | 11.0| 12.0|  10.7|   ​9.6| ​  ​9.6| ​  9.4| | WBO2        | 11.0| 12.0|  10.7|   ​9.6| ​  ​9.6| ​  9.4|
 | Adjustment ​ | +17%| +25%|  +13%|   ​+4%| ​  ​+3%| ​  -1%| | Adjustment ​ | +17%| +25%|  +13%|   ​+4%| ​  ​+3%| ​  -1%|
 +
 +
 +A simple formula for calculating this is(submitted by Omar R. "​DSMmaniac_Big_O"​):​
 +
 +(est a/f - WB02) * (-10) = airflow adjustment amount.
 +
 +<​code>​Example:​
 +MAFRaw (hz)  800  ​
 +A/F Ratio    9.5                               
 +WBO2      ​12.0 ​                             ​
 +Adjustment ​ + 25%  ​
 +
 +(9.5 - 12.0) * (- 10)                        ​
 +      (-2.5) ​  * (- 10)                                     
 +        = 25% </​code> ​      
  
 ====== Notes ====== ====== Notes ======
maftcalibrationbywbo2.txt ยท Last modified: 2024/03/15 11:16 (external edit)