This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
This page contains information on the internal workings of DSMLink's "nitrous" controls (FPR solenoid output control logic). If you want to know how to wire something up to this output please review the nitrous control wiring page.
Nitrous control RPM values cannot be set above these points:
"Trick" to verify solenoid operation:
First, ensure that you do NOT have *ANY* nitrous in the nitrous system (bottle off, removed from car, etc.). Next, With the ENGINE OFF and the KEY ON set the Nitrous controls to:
Click "OK" and then press the gas pedal. This will turn the nitrous controls ON so you can verify solenoid operation.