User Tools

Site Tools


sdsetup

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision Both sides next revision
sdsetup [2010/11/14 08:45]
twdorris
sdsetup [2010/11/14 08:45]
twdorris
Line 89: Line 89:
 {{  http://​www.ecmtuning.com/​images/​forums/​sddata/​sdmaploc.png}} {{  http://​www.ecmtuning.com/​images/​forums/​sddata/​sdmaploc.png}}
 Because you can connect your MAP sensor to any number of ECU inputs, you have to tell the ECU where it can find this sensor in order to use it for SD operation. ​ You do this on the ECU Inputs tab in the "Pin Assignments for ECMLink Functions (ECU-side)"​ area. Because you can connect your MAP sensor to any number of ECU inputs, you have to tell the ECU where it can find this sensor in order to use it for SD operation. ​ You do this on the ECU Inputs tab in the "Pin Assignments for ECMLink Functions (ECU-side)"​ area.
 +
  
  
Line 101: Line 102:
 Tell the ECU to ignore incoming MAF data and calculate it from speed density data instead. ​ You do that on the MAFComp tab by selecting "Speed Density"​ as your Base MAF type. Tell the ECU to ignore incoming MAF data and calculate it from speed density data instead. ​ You do that on the MAFComp tab by selecting "Speed Density"​ as your Base MAF type.
  
-**NOTE:** If you have a REALLY old version of V3Lite, then you'll find a checkbox on the SD tab labeled "​enable speed density"​ instead. ​ If that's the case, pleas consider [[v3firmwarehowto|upgrading your firmware]] because your V3Lite ECU is seriously outdated.+**NOTE:** If you have a REALLY old version of V3Lite, then you'll find a checkbox on the SD tab labeled "​enable speed density"​ instead. ​ If that's the case, please ​consider [[v3firmwarehowto|upgrading your firmware]] because your V3Lite ECU is seriously outdated.
  
  
sdsetup.txt ยท Last modified: 2024/03/15 11:16 (external edit)