ECMTuning - wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

<h1>ECU Socket Info</h1> <div class="level1"> <p> First, please check to make sure you have an EPROM model ECU. ECMLink is <b>only</b> compatible with EPROM model ECUs. The following two pictures illustrate the difference. </p> <p> <a href="/wiki/lib/exe/fetch.php?tok=90da2b&media=http%3A%2F%2Fwww.dsmlink.com%2Fimages%2Fphotos%2Finside1gnoneprom.jpg" class="media" title="http://www.dsmlink.com/images/photos/inside1gnoneprom.jpg"><img src="/wiki/lib/exe/fetch.php?tok=90da2b&media=http%3A%2F%2Fwww.dsmlink.com%2Fimages%2Fphotos%2Finside1gnoneprom.jpg" class="media" title="www.dsmlink.com_images_photos_inside1gnoneprom.jpg" alt="www.dsmlink.com_images_photos_inside1gnoneprom.jpg" /></a> <a href="/wiki/lib/exe/fetch.php?tok=eeede8&media=http%3A%2F%2Fwww.dsmlink.com%2Fimages%2Fphotos%2Finside1geprom.jpg" class="media" title="http://www.dsmlink.com/images/photos/inside1geprom.jpg"><img src="/wiki/lib/exe/fetch.php?tok=eeede8&media=http%3A%2F%2Fwww.dsmlink.com%2Fimages%2Fphotos%2Finside1geprom.jpg" class="media" title="www.dsmlink.com_images_photos_inside1geprom.jpg" alt="www.dsmlink.com_images_photos_inside1geprom.jpg" /></a> </p> <p> If you have a 1G ('90-94) non-EPROM ECU, we can offer an EPROM conversion service. But if you have a non-EPROM 2G (1996+) ECU, you will have to locate an EPROM model. Our <a href="/wiki/doku.php?id=epromid" class="wikilink1" title="epromid">EPROM ID</a> page has more information related to this. </p> <p> Once you have identified that your ECU has an EPROM, next you'll need to check to see if the EPROM is installed in a socket or not. If the EPROM is soldered directly to the ECU's PCB, then you will need to have that ECU socketed before you can install ECMLink. If, however, the EPROM is installed in a socket like the one shown <a href="/wiki/doku.php?id=socketpartnumber" class="wikilink1" title="socketpartnumber">here</a>, then you're all set. A socket like this allows the EPROM and/or ECMLink flash device to be easily removed and replaced without having to do any soldering work. </p> </div>