Differences

This shows you the differences between two versions of the page.

--- socketpartnumber [2008/03/15 06:48]
twdorris
+++ socketpartnumber [2024/03/15 11:16]
@@ Line 1: / Line 1: @@
-====== Socket Part Number ======
-We get asked fairly often about the actual socket we use when doing a socket job on an ECU.  This page is just a collection of that information.
-====== Details ======
-We use a low-profile, machined-pin socket made by Mill-Max.  It's a 28-pin socket, of course, to match the 28-pin EPROM used in the DSM ""ECUs"".
-^Vendor |Mill-Max Manufacturing Corp. |
-^Manufacturer P/N |110-99-628-41-001000 |
-^Description |IC SOCKET 28PIN MS TIN/TIN .600 |
-^Contact Finish |Tin-Lead, 200 µin (5.08 µm) |
-^Digi-Key P/N |ED3728-ND |
-^RoHS Replacement |110-44-628-41-001000 |
-To order one of these, you can just contact [[http://www.digikey.com/|Digi-Key]] using the part number information above.  A picture of this socket is provided below.
-{{socket.gif}}

ECMTuning - wiki