User Tools

Site Tools


swapplugwires

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
swapplugwires [2011/02/21 04:06]
snowborder714
swapplugwires [2011/02/21 04:08]
snowborder714
Line 3: Line 3:
 When installing a '95 EPROM ECU (or '96) on car with a non-'​95/'​96 style cam angle sensor, you have to rearrange the plug wires. ​ You will also want to check the "Use non-95/96 style cam angle sensor"​ checkbox in the Misc tab of the ECU Config tab (called "​Invert CAS" option in the ''​ECU->​Miscellaneous''​ dialog in the older V2 application). When installing a '95 EPROM ECU (or '96) on car with a non-'​95/'​96 style cam angle sensor, you have to rearrange the plug wires. ​ You will also want to check the "Use non-95/96 style cam angle sensor"​ checkbox in the Misc tab of the ECU Config tab (called "​Invert CAS" option in the ''​ECU->​Miscellaneous''​ dialog in the older V2 application).
  
-When installing a '97 ECU that has been converted to EPROM on a car with a 1g or 2gb cam angle sensor, you would not need check the box to invert the CAS and swap plug wires, as the signals should be the same as the ECU is expecting to see.  However, if you are installing it in a car with a '​95/'​96 cam angle sensor, you do need to check the box to invert the CAS as well as swap the plug wires.+When installing a '97 ECU that has been converted to EPROM on a car with a 1g or 2gb cam angle sensor, you would not need check the box to invert the CAS and swap plug wires, as the signals should be the same as the ECU is expecting to see.  However, if you are installing it in a car with a '​95/'​96 cam angle sensor, you do need to check the box to invert the CASas well as swap the plug wires.
  
 If you don't know whether you have a '​95/'​96 style cam angle sensor or not, check the passenger side of the valve cover for an externally mounted cam angle sensor. ​ If one is present, you'll see it installed in the area shown below. If you don't know whether you have a '​95/'​96 style cam angle sensor or not, check the passenger side of the valve cover for an externally mounted cam angle sensor. ​ If one is present, you'll see it installed in the area shown below.
swapplugwires.txt ยท Last modified: 2011/02/21 04:08 by snowborder714