User Tools

Site Tools


usb2comport

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Last revision Both sides next revision
usb2comport [2009/09/02 06:53]
twdorris
usb2comport [2009/09/02 06:55]
twdorris
Line 35: Line 35:
 ''​PORT B – Location ID 0x00000042''​ ''​PORT B – Location ID 0x00000042''​
  
-Identify these two ports on your local machine ​and write them down.  The following examples will use these two ports. ​ Be sure to use your OWN IDs instead of the ones used in this example as your PC will be different+Identify these ports on your laptop (however many you want to assign) ​and write them down.  The following examples will use these two ports. ​ Be sure to use your **OWN IDs** instead of the ones used in this example as your laptop ​will be different.
  
 +Now, bring up the **regedit** application by going to Start->​Run and typing in regedit then hitting OK.  Navigate to the following node:
 +
 +''​HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\FTDIBUS\Parameters''​
 +
 +You may need to create the **Parameters** node if it doesn'​t already exist. ​ If so, simply highlight the **FTDIBUS** node and select **Edit->​New->​Key** from the regedit application. ​ Then type **Parameters** as the new name.  Select the Parameters key and you should see something like the following.
 +
 +{{  http://​www.ecmtuning.com/​images/​forums/​usbview/​usbview-04.gif ​ }}
  
  
usb2comport.txt · Last modified: 2009/09/02 06:57 by twdorris