Differences

This shows you the differences between two versions of the page.

--- usb2comport [2009/09/02 06:57]
twdorris
+++ usb2comport [2024/03/14 13:51]
twdorris [USBView]
@@ Line 15: / Line 15: @@
 ==== USBView ====
-To obtain the location IDs of your physical USB ports, use the [[http://www.ecmtuning.com/images/forums/usbview/usbview.exe|USBView application]].  When you run this application, you will be presented with a screen as shown below.  Of course, the laptop on which you are running this application will have a different configuration.
-{{  http://www.ecmtuning.com/images/forums/usbview/usbview-01.gif  }}
-First, select the Options->Location IDs menu item and then hit F5 to refresh the screen.  The above screen will now look like the one shown below.
+To obtain the location IDs of your physical USB ports, use the [[https://www.ecmtuning.com/images/forums/usbview/usbview.exe|USBView application]]. When you run this application, you will be presented with a screen as shown below. Of course, the laptop on which you are running this application will have a different configuration.
-Notice that the **Port** numbers from the first screen are now shown as **Loc** numbers.  Those are the physical location IDs of the USB ports on your PC.
-{{  http://www.ecmtuning.com/images/forums/usbview/usbview-02.gif  }}
+{{  http://www.ecmtuning.com/images/forums/usbview/usbview-01.gif?direct&  }}
+First, select the Options→Location IDs menu item and then hit F5 to refresh the screen. The above screen will now look like the one shown below.
+Notice that the **Port** numbers from the first screen are now shown as **Loc** numbers. Those are the physical location IDs of the USB ports on your PC.
+{{  http://www.ecmtuning.com/images/forums/usbview/usbview-02.gif?direct&  }}
+To determine the location ID that corresponds to a physical USB port on your laptop, simply insert one of our ECMLink cables into the port. Once you have inserted this cable, hit F5 again to refresh USBView.
-To determine the location ID that corresponds to a physical USB port on your laptop, simply insert one of our ECMLink cables into the port.  Once you have inserted this cable, hit F5 again to refresh USBView.
 Now you will see something like the following (notice the new **USB Serial Converter** at **Loc41**).
-{{  http://www.ecmtuning.com/images/forums/usbview/usbview-03.gif  }}
-Note that **Loc41** now says ''DeviceConnected : USB Serial Converter'' where as before it simply said ''NoDeviceConnected''.  That means that the USB port into which our cable was inserted is at location ID ''0x00000041''.  When this cable is removed from that port and installed into another port, ''Loc42'' (in this example) shows ''DeviceConnected'', indicating the following.
+{{  http://www.ecmtuning.com/images/forums/usbview/usbview-03.gif?direct&  }}
+Note that **Loc41** now says ''DeviceConnected : USB Serial Converter'' where as before it simply said ''NoDeviceConnected''. That means that the USB port into which our cable was inserted is at location ID ''0x00000041''. When this cable is removed from that port and installed into another port, ''Loc42'' (in this example) shows ''DeviceConnected'', indicating the following.
+''PORT A – Location ID 0x00000041'' \\
+''PORT B – Location ID 0x00000042''
-''PORT A – Location ID 0x00000041'' \\
-''PORT B – Location ID 0x00000042''
-Identify these ports on your laptop (however many you want to assign) and write them down.  The following examples will use these two ports.  Be sure to use your **OWN IDs** instead of the ones used in this example as your laptop will be different.
+Identify these ports on your laptop (however many you want to assign) and write them down. The following examples will use these two ports. Be sure to use your **OWN IDs** instead of the ones used in this example as your laptop will be different.
 ==== Regedit ====

ECMTuning - wiki

User Tools

Site Tools

Differences

Page Tools