User Tools

Site Tools


v3configs

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
v3configs [2010/01/26 07:58]
twdorris
v3configs [2012/10/24 15:16] (current)
twdorris
Line 39: Line 39:
  
 If you *only* want data from one table without everything else on that same tab, then right click in the table and select "copy table"​. ​ That places a copy of that table data into the clipboard. ​ Now, connect to your ECU and pull up the ECU Config tab where that table is located, right click again and select "paste table"​. If you *only* want data from one table without everything else on that same tab, then right click in the table and select "copy table"​. ​ That places a copy of that table data into the clipboard. ​ Now, connect to your ECU and pull up the ECU Config tab where that table is located, right click again and select "paste table"​.
 +
  
  
Line 54: Line 55:
 **DIRECT ACCESS NOTE:** Direct Access data already has a "reset to stock" function built-in because "​stock"​ in that case is very clear. ​ But ECU Config "​stock"​ data is not so clear and may have slightly different values with each release. ​ The files below provide "​stock"​ ECU Config data files for each release. ​ They do not contain any direct access data. **DIRECT ACCESS NOTE:** Direct Access data already has a "reset to stock" function built-in because "​stock"​ in that case is very clear. ​ But ECU Config "​stock"​ data is not so clear and may have slightly different values with each release. ​ The files below provide "​stock"​ ECU Config data files for each release. ​ They do not contain any direct access data.
  
-^Firmware version^File^ +^Firmware version^File^Compatible versions
-|1G v3.18.205 ​ |[[http://​www.ecmtuning.com/​images/​forums/​v3configs/​stockbuilds/​stock1g-3.18.205.ecm|stock1g-3.18.205.ecm]] ​ | +|1G v3.18.205 ​ |[[http://​www.ecmtuning.com/​images/​forums/​v3configs/​stockbuilds/​stock1g-3.18.205.ecm|stock1g-3.18.205.ecm]]  ​
-|2G v3.18.205 ​ |[[http://​www.ecmtuning.com/​images/​forums/​v3configs/​stockbuilds/​stock2g-3.18.205.ecm|stock2g-3.18.205.ecm]] ​ | +|2G v3.18.205 ​ |[[http://​www.ecmtuning.com/​images/​forums/​v3configs/​stockbuilds/​stock2g-3.18.205.ecm|stock2g-3.18.205.ecm]]  ​
-|1G v3.19.40 ​ |[[http://​www.ecmtuning.com/​images/​forums/​v3configs/​stockbuilds/​stock1g-3.19.40.ecm|stock1g-3.19.40.ecm]] ​ | +|1G v3.19.40 ​ |[[http://​www.ecmtuning.com/​images/​forums/​v3configs/​stockbuilds/​stock1g-3.19.40.ecm|stock1g-3.19.40.ecm]]  ​| Also for v3.19.49 ​
-|2G v3.19.40 ​ |[[http://​www.ecmtuning.com/​images/​forums/​v3configs/​stockbuilds/​stock2g-3.19.40.ecm|stock2g-3.19.40.ecm]] ​ | +|2G v3.19.40 ​ |[[http://​www.ecmtuning.com/​images/​forums/​v3configs/​stockbuilds/​stock2g-3.19.40.ecm|stock2g-3.19.40.ecm]] ​ | Also for v3.19.49 |
-|1G v3.19.49 ​ |No changes. ​ Use [[http://​www.ecmtuning.com/​images/​forums/​v3configs/​stockbuilds/​stock1g-3.19.40.ecm|v3.19.40 file]]. ​ | +
-|2G v3.19.49 ​ |No changes. ​ Use [[http://​www.ecmtuning.com/​images/​forums/​v3configs/​stockbuilds/​stock2g-3.19.40.ecm|v3.19.40 file]].  ​|+
  
v3configs.txt · Last modified: 2012/10/24 15:16 by twdorris