ECMTuning - wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

<h1>V3Lite Configurations Options</h1> <div class="level1"> <p> This page is a collection of tips and files for setting V3Lite up for a few common alternative configurations. </p> <p> <b>Full V3:</b> If you have the full V3 package, you will want to use our <a href="/wiki/doku.php?id=v3configs" class="wikilink1" title="v3configs">V3 configs page</a> instead. </p> <p> <b>EVO8 settings:</b> The section that used to be here for EVO8 injectors has been moved to the more specific <a href="/wiki/doku.php?id=evo8v3settings" class="wikilink1" title="evo8v3settings">EVO8 V3 settings</a> page. </p> </div> <h2>Replacement Timing and Fuel tables</h2> <div class="level2"> <p> The following are a few sample OpenLoop and Tmng tables for use with ECMLink. To use these, simply open them with File→Open. That will bring up a direct access tab with only the data pulled from the opened file. Once you're there, you can hit the "Copy all to ECU" button to copy all the tables in the file into the ECU. These replace the underlying open loop target A/F ratio and timing tables. Remember, if you don't like them, you can always swap back to stock with the click of a toolbar button in the DirectAccess tab. </p> <span class='np_break'> </span> <div class="table"><table class="inline"> <thead> <tr class="row0"> <th class="col0">Platform</th><th class="col1">File</th><th class="col2">Desc</th> </tr> </thead> <tr class="row1"> <td class="leftalign">Stock EVO1-3 </td><td class="leftalign"><a href="http://www.ecmtuning.com/images/forums/v3configs/EVO1-3-stock-v3lite.eda" class="urlextern" title="http://www.ecmtuning.com/images/forums/v3configs/EVO1-3-stock-v3lite.eda" rel="nofollow">EVO1-3-stock.eda</a> </td><td class="leftalign">Stock EVO1-3 </td> </tr> <tr class="row2"> <td class="leftalign">2003 USDM EVO8 </td><td class="leftalign"><a href="http://www.ecmtuning.com/images/forums/v3configs/EVO8-2003-stock-v3lite.eda" class="urlextern" title="http://www.ecmtuning.com/images/forums/v3configs/EVO8-2003-stock-v3lite.eda" rel="nofollow">EVO8-2003-stock.eda</a> </td><td class="leftalign">Bone stock 2003 EVO8 - my own car </td> </tr> <tr class="row3"> <td class="leftalign">2003 USDM EVO8 (mod1) </td><td class="leftalign"><a href="http://www.ecmtuning.com/images/forums/v3configs/EVO8-2003-mod1-v3lite.eda" class="urlextern" title="http://www.ecmtuning.com/images/forums/v3configs/EVO8-2003-mod1-v3lite.eda" rel="nofollow">EVO8-2003-mod1.eda</a> </td><td class="leftalign">A slightly modified version of the 2003 EVO8 map that works a bit better on high boost/quick spool cars. </td> </tr> <tr class="row4"> <td class="leftalign">2004 EVO8 GSR Ralliart </td><td class="leftalign"><a href="http://www.ecmtuning.com/images/forums/v3configs/EVO8-2004-GSR-Ralliart-v3lite.eda" class="urlextern" title="http://www.ecmtuning.com/images/forums/v3configs/EVO8-2004-GSR-Ralliart-v3lite.eda" rel="nofollow">EVO8-2004-GSR-Ralliart</a> </td><td class="leftalign">A rather aggressive tune. Review first! </td> </tr> </table> <span class='np_break'> </span> </div> </div> <h2>Replacement MAF tables (pre-3.20.107)</h2> <div class="level2"> <p> <b>NOTE:</b> This section ONLY applies to V3Lite version <b>before</b> <a href="/wiki/doku.php?id=v3litefirmwarechangelog" class="wikilink1" title="v3litefirmwarechangelog">3.20.107</a>. But, really, if you have a version of V3Lite before version 3.20.107, you should <a href="http://www.ecmtuning.com/apps/firmwareupgrade" class="urlextern" title="http://www.ecmtuning.com/apps/firmwareupgrade" rel="nofollow">upgrade</a> instead of using these files. The 3.20.107 release made V3Lite MUCH easier to use. </p> <p> If you install a 2G DSM MAF on a car with a 1G ECU, you'll need to change the underlying MAF compensation tables. Similarly, if you install an EVO8/3G MAF on a 1G, 2G or EVO1-3 ECU, you'll need to do the same thing. The files you need to use are below. Just load the appropriate file into the ECMLink application and hit “Copy all to ECU”. That's about it. </p> <span class='np_break'> </span> <div class="table"><table class="inline"> <thead> <tr class="row0"> <th class="col0">MAF</th><th class="col1">File</th><th class="col2">Desc</th> </tr> </thead> <tr class="row1"> <td class="leftalign">Stock 1G DSM </td><td class="leftalign"><a href="http://www.ecmtuning.com/images/forums/v3configs/1GDSM-stock-MAF-v3lite.eda" class="urlextern" title="http://www.ecmtuning.com/images/forums/v3configs/1GDSM-stock-MAF-v3lite.eda" rel="nofollow">1GDSM-stock-MAF-v3lite.eda</a> </td><td class="leftalign">Stock 1G DSM </td> </tr> <tr class="row2"> <td class="col0">Stock 2G DSM or EVO1-3</td><td class="leftalign"><a href="http://www.ecmtuning.com/images/forums/v3configs/2GDSM-stock-MAF-v3lite.eda" class="urlextern" title="http://www.ecmtuning.com/images/forums/v3configs/2GDSM-stock-MAF-v3lite.eda" rel="nofollow">2GDSM-stock-MAF-v3lite.eda</a> </td><td class="leftalign">Stock 2G DSM or EVO1-3 (609) </td> </tr> <tr class="row3"> <td class="leftalign">Stock EVO8/3G </td><td class="leftalign"><a href="http://www.ecmtuning.com/images/forums/v3configs/EVO8-stock-MAF-v3lite.eda" class="urlextern" title="http://www.ecmtuning.com/images/forums/v3configs/EVO8-stock-MAF-v3lite.eda" rel="nofollow">EVO8-stock-MAF-v3lite.eda</a> </td><td class="leftalign">Stock Lancer EVO8/3G MAF (399 or 501) </td> </tr> </table> <span class='np_break'> </span> </div> </div>