User Tools

Site Tools


v3liteconfigs

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
v3liteconfigs [2011/01/10 15:05]
twdorris
v3liteconfigs [2011/01/10 15:07] (current)
twdorris
Line 16: Line 16:
 |2003 USDM EVO8 (mod1) ​ |[[http://​www.ecmtuning.com/​images/​forums/​v3configs/​EVO8-2003-mod1-v3lite.eda|EVO8-2003-mod1.eda]] ​ |A slightly modified version of the 2003 EVO8 map that works a bit better on high boost/quick spool cars.  | |2003 USDM EVO8 (mod1) ​ |[[http://​www.ecmtuning.com/​images/​forums/​v3configs/​EVO8-2003-mod1-v3lite.eda|EVO8-2003-mod1.eda]] ​ |A slightly modified version of the 2003 EVO8 map that works a bit better on high boost/quick spool cars.  |
 |2004 EVO8 GSR Ralliart ​ |[[http://​www.ecmtuning.com/​images/​forums/​v3configs/​EVO8-2004-GSR-Ralliart-v3lite.eda|EVO8-2004-GSR-Ralliart]] ​ |A rather aggressive tune.  Review first! ​ | |2004 EVO8 GSR Ralliart ​ |[[http://​www.ecmtuning.com/​images/​forums/​v3configs/​EVO8-2004-GSR-Ralliart-v3lite.eda|EVO8-2004-GSR-Ralliart]] ​ |A rather aggressive tune.  Review first! ​ |
 +
  
  
  
 ===== Replacement MAF tables (pre-3.20.107) ===== ===== Replacement MAF tables (pre-3.20.107) =====
-**NOTE:** This section ONLY applies to V3Lite version **before** [[v3litefirmwarechangelog|3.20.107]]. ​ But, really, if you have a version of V3Lite before version 3.20.107, you should [[http://​www.ecmtuning.com/​apps/​firmwareupgrade|upgrade]] instead of using these files. ​ The 3.20.107 release made V3Lite ​MUCH easier ​to use.+**NOTE:** This section ONLY applies to V3Lite version **before** [[v3litefirmwarechangelog|3.20.107]]. ​ But, really, if you have a version of V3Lite before version 3.20.107, you should [[http://​www.ecmtuning.com/​apps/​firmwareupgrade|upgrade]] instead of using these files. ​ The 3.20.107 release made it possible for V3Lite ​users to simply select a new Base MAF type on the MAFComp tab like the full V3 users could. 
 + 
 +But if you want to stick with your current version of V3Lite for some reason, then here are the files you'll need to use to change your base MAF type.
  
 If you install a 2G DSM MAF on a car with a 1G ECU, you'll need to change the underlying MAF compensation tables. ​ Similarly, if you install an EVO8/3G MAF on a 1G, 2G or EVO1-3 ECU, you'll need to do the same thing. ​ The files you need to use are below. ​ Just load the appropriate file into the ECMLink application and hit “Copy all to ECU”. That's about it.  If you install a 2G DSM MAF on a car with a 1G ECU, you'll need to change the underlying MAF compensation tables. ​ Similarly, if you install an EVO8/3G MAF on a 1G, 2G or EVO1-3 ECU, you'll need to do the same thing. ​ The files you need to use are below. ​ Just load the appropriate file into the ECMLink application and hit “Copy all to ECU”. That's about it. 
v3liteconfigs.txt · Last modified: 2011/01/10 15:07 by twdorris