User Tools

Site Tools


2ghackedmassettings

This is an old revision of the document!


2G Hacked MAF Settings

If you remove both side honeycombs and the one lower honeycomb (leaving the center in place) on a 2G MAF, you need to adjust for this in the MAF compensation dialog in DSMLink. The table below lists the values you would use for a typical setup. Note for 1G guys that you will need to select “2G MAF” as your base MAF type first. The following compensation values are based on the assumption that the ECU is configured for a 2G MAF.

Details

Freq Adj
50hz +48%
150hz +30%
250hz +25%
400hz +22%
800hz +17%
1200hz +13%
1600hz +13%
2000hz +13%
2400hz +13%
2ghackedmassettings.1201177372.txt.gz · Last modified: 2008/01/24 07:22 by twdorris