2ginevo8
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | |||
|
2ginevo8 [2013/07/23 13:46] twdorris |
2ginevo8 [2024/03/15 11:16] (current) |
||
|---|---|---|---|
| Line 42: | Line 42: | ||
| 37 Cut this wire. It provides the ECU with a power steering pressure switch indication. This is used to raise idle when you turn the steering wheel. But it causes more problems than anything else when running a 2G DSM ECU. Just cut it. It's not needed. I have no dips in idle when turning my steering wheel with this wire cut. | 37 Cut this wire. It provides the ECU with a power steering pressure switch indication. This is used to raise idle when you turn the steering wheel. But it causes more problems than anything else when running a 2G DSM ECU. Just cut it. It's not needed. I have no dips in idle when turning my steering wheel with this wire cut. | ||
| - | 56 Cut this wire, run a wire from 56 at the 95 ECU to pin 1 at the [[http://www.dsmlink.com/images/forums/obdiiconnector.gif|OBD2 port in the car]] (note that the image is of the OBD2 connector in the car). Cut pin 1 wire at OBD2 port, do not splice this in. You want the 95 ECU to be the only thing connected to this pin on the OBD2 port. | + | 56 Cut this wire, run a wire from 56 at the 95 ECU to pin 1 at the [[https://www.ecmtuning.com/images/forums/obdiiconnector.gif|OBD2 port in the car]] (note that the image is of the OBD2 connector in the car). Cut pin 1 wire at OBD2 port, do not splice this in. You want the 95 ECU to be the only thing connected to this pin on the OBD2 port. |
| Line 97: | Line 97: | ||
| You can do that with some custom direct access files. Download these files: | You can do that with some custom direct access files. Download these files: | ||
| - | [[http://www.ecmtuning.com/wiki/_media/evo8-fan-ctrl.properties|evo8-fan-ctrl.properties]] | + | [[https://www.ecmtuning.com/wiki/_media/evo8-fan-ctrl.properties|evo8-fan-ctrl.properties]] |
| - | [[http://www.ecmtuning.com/wiki/_media/ac-fan-2g.properties|ac-fan-2g.properties]] | + | [[https://www.ecmtuning.com/wiki/_media/ac-fan-2g.properties|ac-fan-2g.properties]] |
| Save each into the following directory: | Save each into the following directory: | ||
| Line 124: | Line 124: | ||
| The EVO ISC motor must provide more airflow per "step" because default operation with a 2G DSM ECU results in idle surges as the car starts to move. You can disable this using the patch listed below (you'll want to grab the moving idle disable file towards the bottom). | The EVO ISC motor must provide more airflow per "step" because default operation with a 2G DSM ECU results in idle surges as the car starts to move. You can disable this using the patch listed below (you'll want to grab the moving idle disable file towards the bottom). | ||
| - | [[http://www.ecmtuning.com/wiki/direct_access_changes|Custom Direct Access Files]] | + | [[https://www.ecmtuning.com/wiki/direct_access_changes|Custom Direct Access Files]] |
| You may also find that having the power steering pump signal connected to the ECU can cause crazy ramps up in idle too. To "work around" that, simply disconnect the wire leading to the pressure sensor on the power steering pump. That way the ECU will simply never "see" this signal and won't respond to it. | You may also find that having the power steering pump signal connected to the ECU can cause crazy ramps up in idle too. To "work around" that, simply disconnect the wire leading to the pressure sensor on the power steering pump. That way the ECU will simply never "see" this signal and won't respond to it. | ||
| Line 141: | Line 141: | ||
| The following files will be most useful to someone looking to confirm the information above or to find a new way to approach some of the issues. | The following files will be most useful to someone looking to confirm the information above or to find a new way to approach some of the issues. | ||
| - | [[http://www.dsmlink.com/images/forums/rreevo8pinout.pdf|EVO8 pin out]] \\ | + | [[https://www.ecmtuning.com/images/forums/rreevo8pinout.pdf|EVO8 pin out]] \\ |
| - | [[http://www.dsmlink.com/images/forums/2GECUPinout.pdf|2G DSM pin out]] \\ | + | [[https://www.ecmtuning.com/images/forums/2GECUPinout.pdf|2G DSM pin out]] \\ |
| - | [[http://www.dsmlink.com/images/forums/evo8mfi.pdf|EVO8 MFI schematic]] \\ | + | [[https://www.ecmtuning.com/images/forums/evo8mfi.pdf|EVO8 MFI schematic]] \\ |
| - | [[http://www.dsmlink.com/images/forums/2GECUMFI.pdf|2G MFI schematic]] \\ | + | [[https://www.ecmtuning.com/images/forums/2GECUMFI.pdf|2G MFI schematic]] \\ |
| - | [[http://www.dsmlink.com/images/forums/evo8cooling.pdf|EVO8 cooling schematic]] \\ | + | [[https://www.ecmtuning.com/images/forums/evo8cooling.pdf|EVO8 cooling schematic]] \\ |
| - | [[http://www.dsmlink.com/images/forums/2gcooling.pdf|2G DSM cooling schematic]] \\ | + | [[https://www.ecmtuning.com/images/forums/2gcooling.pdf|2G DSM cooling schematic]] \\ |
2ginevo8.1374601616.txt.gz · Last modified: 2013/07/23 13:46 by twdorris
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
