This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision Next revision Both sides next revision | ||
90clutchcut [2009/02/25 07:36] twdorris |
90clutchcut [2009/09/14 16:52] dmertz |
||
---|---|---|---|
Line 1: | Line 1: | ||
====== Clutch Cut Wiring in a '90 ====== | ====== Clutch Cut Wiring in a '90 ====== | ||
- | As many of you know, the '90 models have quite a number of little differences between the '91+ model years. One of these is cruise control switch functionality -- on '91+ cars the cruise control switch is a switch to ground, however on the '90 cars it is a switched 12v line. This means that the clutch-cut wire which was included with your ECMLink package will not work on the cruise-control switch (it DOES work correctly if installed on the starter switch), and you will need to do a little more work if you want to use NLTS on a '90 DSM using the cruise switch (the one activated when your foot is completely off the pedal). | + | As many of you know, the '90 models have quite a number of little differences between the '91+ model years. One of these is cruise control switch functionality -- on '91+ cars the cruise control switch is a switch to ground, however on the '90 cars it is a switched 12v line. This means that the clutch-cut wire which was included with your ECMLink package will not work on the cruise-control switch (it DOES work correctly if installed on the starter switch), and you will need to do a little more work if you want to use NLTS on a '90 DSM using the cruise switch (the one activated when your foot is completely off the pedal). |
+ | |||
+ | Note: The ECU diagram here [[http://www.dsmlink.com/images/forums/1GECUPinout.pdf]] shows the wire into the ecu as black w/yellow, although at least one person has reported that their 90 talon has black wire with red dots instead. | ||
====== Method 1 ====== | ====== Method 1 ====== |