User Tools

Site Tools


createvolumetricefficiencymap

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

createvolumetricefficiencymap [2008/01/23 09:02]
76.100.119.159 created
createvolumetricefficiencymap [2008/01/24 07:26]
twdorris
Line 1: Line 1:
-====== ​Overview ​======+====== ​Create Volumetric Efficiency Map ======
  
 The VE table is **only** used while the ECU is operating in Fake MAF mode.  When Fake MAF is selected, the signal coming from the real MAF is ignored above the entered switch over point. ​ For that point on, a MAF signal is simulated by extrapolating from the conditions observed at the switch over point. The VE table is **only** used while the ECU is operating in Fake MAF mode.  When Fake MAF is selected, the signal coming from the real MAF is ignored above the entered switch over point. ​ For that point on, a MAF signal is simulated by extrapolating from the conditions observed at the switch over point.
createvolumetricefficiencymap.txt ยท Last modified: 2024/03/15 11:16 (external edit)