dsmlinktpsadjustment
Differences
This shows you the differences between two versions of the page.
| Next revision Both sides next revision | |||
|
dsmlinktpsadjustment [2008/01/23 09:13] 76.100.119.159 created |
dsmlinktpsadjustment [2008/01/24 07:27] twdorris |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | ====== Overview ====== | + | ====== TPS Adjustment Procedure ====== |
| The ECU wants to see 0.63v from the TPS sensor when your foot is off the throttle and greater than, say, 4.6v when you're fully on it. You can datalog TPSvolts to see what the ECU is really getting. The value at idle (foot off the throttle) is probably more important than the value at wide open throttle. A value that's too high at idle can prevent the idle switch from activating or it will prevent the "simulate idle switch" functionality from working properly. | The ECU wants to see 0.63v from the TPS sensor when your foot is off the throttle and greater than, say, 4.6v when you're fully on it. You can datalog TPSvolts to see what the ECU is really getting. The value at idle (foot off the throttle) is probably more important than the value at wide open throttle. A value that's too high at idle can prevent the idle switch from activating or it will prevent the "simulate idle switch" functionality from working properly. | ||
dsmlinktpsadjustment.txt ยท Last modified: 2024/03/15 11:16 (external edit)
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
