ecmlink101initialchecks
This is an old revision of the document!
Table of Contents
ECMLink 101 - Sanity checks
On this page, we're going to assume you've already run through the install procedure and have gotten a good connection established with the ECU. If you have not, please review the Installation page first.
Verify
Pull up the ECU Config tab and verify some basic settings. You should see something like this.
Base MAF type
In the MAF Comp tab
ecmlink101initialchecks.1236085659.txt.gz · Last modified: 2009/03/03 08:07 by twdorris
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
