This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
If you're looking to run a set of stock EVO8 injectors or an EVO8 MAF with your V3 ECMLink or V3Lite setup, this page contains the information you'll need to adjust the ECMLink configuration.
If you're running EVO8 injectors with your ECMLink-equipped ECU, here are some numbers you can use to get the ECU configured to match identically with the EVO8 ECU itself.
In "ECU config" on the "Fuel" tab, set Global fuel to -17.6% and deadtime to 0 usecs.
In the InjBatteryAdj table in direct access, set the table like so: