This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
The basic process for installing an external (aftermarket) sensor for datalogging use with DSMLink is pretty simple. The details can get a little time consuming and tedious. But the general idea is to do the following.
The following diagram, while specific to a Zeitronix WBO2 install on a 1G, is still useful in illustrating the general idea. It shows the Zeitronix kit (external sensor) and how the various types of connections are made to the ECU wiring and then a general description of how to proceed after that. CLICK TO ENLARGE: