User Tools

Site Tools


injdata-pressure

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
injdata-pressure [2012/02/08 06:45]
twdorris
injdata-pressure [2024/03/15 11:16] (current)
Line 22: Line 22:
 ^  // Click to enlarge //  ^ ^  // Click to enlarge //  ^
  
-Flow rate in that chart above was normalized to 43.5psi to illustrate only the effect on deadtime since the effect on fuel flow rate is easily calculated. ​ If you really want to see the original, unaltered version, [[http://​www.ecmtuning.com/​wiki/​_media/​pressure-effects-noscale.png|click here]].+Flow rate in that chart above was normalized to 43.5psi to illustrate only the effect on deadtime since the effect on fuel flow rate is easily calculated. ​ If you really want to see the original, unaltered version, [[https://​www.ecmtuning.com/​wiki/​_media/​pressure-effects-noscale.png|click here]].
  
 Obviously changing base fuel pressure changes deadtime as well as basic flow rate.  So both effects need to be taken into account when changing base fuel pressure. Obviously changing base fuel pressure changes deadtime as well as basic flow rate.  So both effects need to be taken into account when changing base fuel pressure.
 +
injdata-pressure.1328701506.txt.gz ยท Last modified: 2012/02/08 06:45 by twdorris