ECMTuning - wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

<h1>V3 Configurations Options</h1> <div class="level1"> <p> This page is a collection of tips and files for setting V3 up for a few common alternative configurations. </p> </div> <h2>EVO8 injectors</h2> <div class="level2"> <p> If you're running EVO8 injectors with your ECMLink-equipped ECU, here are some numbers you can use to get the ECU configured to match identically with the EVO8 ECU itself. </p> </div> <h3>Fuel Adjustments Table</h3> <div class="level3"> <p> In "ECU config" on the "Fuel" tab, set Global fuel to -17.6% and deadtime to 0 usecs. </p> </div> <h3>InjBatteryAdj</h3> <div class="level3"> <p> In the InjBatteryAdj table in direct access, set the table like so: </p> <span class='np_break'> </span> <div class="table"><table class="inline"> <thead> <tr class="row0"> <th class="col0">Volts</th><th class="col1">usecs</th> </tr> </thead> <tr class="row1"> <td class="rightalign"> 7</td><td class="rightalign"> 2235</td> </tr> <tr class="row2"> <td class="rightalign"> 9</td><td class="rightalign"> 1380</td> </tr> <tr class="row3"> <td class="rightalign"> 12</td><td class="rightalign"> 900</td> </tr> <tr class="row4"> <td class="rightalign"> 14</td><td class="rightalign"> 570</td> </tr> <tr class="row5"> <td class="rightalign"> 16</td><td class="rightalign"> 345</td> </tr> <tr class="row6"> <td class="rightalign"> 19</td><td class="rightalign"> 195</td> </tr> </table> <span class='np_break'> </span> </div> </div> <h2>Replacement Timing and Fuel tables</h2> <div class="level2"> <p> The following are a few sample OpenLoop and Tmng tables for use with ECMLink. To use these, simply open them with File→Open. That will bring up a direct access tab with only the data pulled from the opened file. Once you're there, you can hit the "Copy all to ECU" button to copy all the tables in the file into the ECU. These replace the underlying open loop target A/F ratio and timing tables. Remember, if you don't like them, you can always swap back to stock with the click of a toolbar button in the DirectAccess tab. </p> <span class='np_break'> </span> <div class="table"><table class="inline"> <thead> <tr class="row0"> <th class="col0">Platform</th><th class="col1">File</th><th class="col2">Desc</th> </tr> </thead> <tr class="row1"> <td class="leftalign">Stock 1G DSM </td><td class="leftalign"><a href="http://www.ecmtuning.com/images/forums/v3configs/DSM-1G-stock.eda" class="urlextern" title="http://www.ecmtuning.com/images/forums/v3configs/DSM-1G-stock.eda" rel="nofollow">DSM-1G-stock.eda</a> </td><td class="leftalign">Stock 1993 1G DSM MT AWD </td> </tr> <tr class="row2"> <td class="leftalign">Stock 2G DSM </td><td class="leftalign"><a href="http://www.ecmtuning.com/images/forums/v3configs/DSM-2G-stock.eda" class="urlextern" title="http://www.ecmtuning.com/images/forums/v3configs/DSM-2G-stock.eda" rel="nofollow">DSM-2G-stock.eda</a> </td><td class="leftalign">Stock 1995 2G DSM MT AWD </td> </tr> <tr class="row3"> <td class="leftalign">2003 USDM EVO8 </td><td class="leftalign"><a href="http://www.ecmtuning.com/images/forums/v3configs/EVO8-2003-stock.eda" class="urlextern" title="http://www.ecmtuning.com/images/forums/v3configs/EVO8-2003-stock.eda" rel="nofollow">EVO8-2003-stock.eda</a> </td><td class="leftalign">Bone stock 2003 EVO8 - my own car </td> </tr> <tr class="row4"> <td class="leftalign">2003 USDM EVO8 (mod1) </td><td class="leftalign"><a href="http://www.ecmtuning.com/images/forums/v3configs/EVO8-2003-mod1.eda" class="urlextern" title="http://www.ecmtuning.com/images/forums/v3configs/EVO8-2003-mod1.eda" rel="nofollow">EVO8-2003-mod1.eda</a> </td><td class="leftalign">A slightly modified version of the 2003 EVO8 map that works a bit better on high boost/quick spool cars. </td> </tr> <tr class="row5"> <td class="leftalign">2004 EVO8 GSR Ralliart </td><td class="leftalign"><a href="http://www.ecmtuning.com/images/forums/v3configs/EVO8-2004-GSR-Ralliart.eda" class="urlextern" title="http://www.ecmtuning.com/images/forums/v3configs/EVO8-2004-GSR-Ralliart.eda" rel="nofollow">EVO8-2004-GSR-Ralliart.eda</a> </td><td class="leftalign">A rather aggressive tune. Review first! </td> </tr> </table> <span class='np_break'> </span> </div> </div> <h2>Replacement Timing and Fuel tables - V3LITE</h2> <div class="level2"> <p> The following are the same sames as above but for the V3Lite platform. These are different because we use slightly different indices for the V3Lite compared to the full V3 version. </p> <span class='np_break'> </span> <div class="table"><table class="inline"> <thead> <tr class="row0"> <th class="col0">Platform</th><th class="col1">File</th><th class="col2">Desc</th> </tr> </thead> <tr class="row1"> <td class="leftalign">Stock EVO1-3 </td><td class="leftalign"><a href="http://www.ecmtuning.com/images/forums/v3configs/EVO1-3-stock-v3lite.eda" class="urlextern" title="http://www.ecmtuning.com/images/forums/v3configs/EVO1-3-stock-v3lite.eda" rel="nofollow">EVO1-3-stock-v3lite.eda</a> </td><td class="leftalign">Stock EVO1-3 </td> </tr> <tr class="row2"> <td class="leftalign">2003 USDM EVO8 </td><td class="leftalign"><a href="http://www.ecmtuning.com/images/forums/v3configs/EVO8-2003-stock-v3lite.eda" class="urlextern" title="http://www.ecmtuning.com/images/forums/v3configs/EVO8-2003-stock-v3lite.eda" rel="nofollow">EVO8-2003-stock.eda</a> </td><td class="leftalign">Bone stock 2003 EVO8 - my own car </td> </tr> <tr class="row3"> <td class="leftalign">2003 USDM EVO8 (mod1) </td><td class="leftalign"><a href="http://www.ecmtuning.com/images/forums/v3configs/EVO8-2003-mod1-v3lite.eda" class="urlextern" title="http://www.ecmtuning.com/images/forums/v3configs/EVO8-2003-mod1-v3lite.eda" rel="nofollow">EVO8-2003-mod1.eda</a> </td><td class="leftalign">A slightly modified version of the 2003 EVO8 map that works a bit better on high boost/quick spool cars. </td> </tr> <tr class="row4"> <td class="leftalign">2004 EVO8 GSR Ralliart </td><td class="leftalign"><a href="http://www.ecmtuning.com/images/forums/v3configs/EVO8-2004-GSR-Ralliart-v3lite.eda" class="urlextern" title="http://www.ecmtuning.com/images/forums/v3configs/EVO8-2004-GSR-Ralliart-v3lite.eda" rel="nofollow">EVO8-2004-GSR-Ralliart.eda</a> </td><td class="leftalign">A rather aggressive tune. Review first! </td> </tr> </table> <span class='np_break'> </span> </div> </div> <h1>V3 Stock Builds</h1> <div class="level1"> <p> This section includes a set of ECU Config files that represent a pure "stock" set of tables and values for each of the given releases. You can use these files to reset tables that you may have modified yourself and want to start over on. </p> <p> <b>DIRECT ACCESS NOTE:</b> Direct Access data already has a "reset to stock" function built-in because "stock" in that case is very clear. But ECU Config "stock" data is not so clear and may have slightly different values with each release. So these need to be handled differently. </p> </div> <h2>How-to</h2> <div class="level2"> <p> <a href="/wiki/lib/exe/fetch.php?tok=90a96c&media=http%3A%2F%2Fwww.ecmtuning.com%2Fimages%2Fforums%2Fv3screenshots%2Ffwversion.png" class="media" title="http://www.ecmtuning.com/images/forums/v3screenshots/fwversion.png"><img src="/wiki/lib/exe/fetch.php?tok=90a96c&media=http%3A%2F%2Fwww.ecmtuning.com%2Fimages%2Fforums%2Fv3screenshots%2Ffwversion.png" class="medialeft" alt="" /></a> Bring up the ECMLink application and connect to your ECU. </p> <p> <b>Firmware version:</b> This is the current firmware version of your device. To reset your ECU Config data back to stock values, select the appropriate file version below based on the firmware version of your V3 flash module. </p> <p> Once you have that file saved to disk, load it up in the ECMLink application. </p> <p> Now, you can either reset the entire ECU by using the "Copy all to ECU" button or you can copy individual tabs using the "Copy to ECU" button. </p> <p> If you *only* want data from one table without everything else on that same tab, then right click in the table and select "copy table". That places a copy of that table data into the clipboard. Now, connect to your ECU and pull up the ECU Config tab where that table is located, right click again and select "paste table". </p> </div> <h2>Stock V3 ECU Config data files</h2> <div class="level2"> <span class='np_break'> </span> <div class="table"><table class="inline"> <thead> <tr class="row0"> <th class="col0">Firmware version</th><th class="col1">File</th> </tr> </thead> <tr class="row1"> <td class="leftalign">1G v3.18.205 </td><td class="leftalign"><a href="http://www.ecmtuning.com/images/forums/v3configs/stockbuilds/stock1g-3.18.205.ecm" class="urlextern" title="http://www.ecmtuning.com/images/forums/v3configs/stockbuilds/stock1g-3.18.205.ecm" rel="nofollow">stock1g-3.18.205.ecm</a> </td> </tr> <tr class="row2"> <td class="leftalign">2G v3.18.205 </td><td class="leftalign"><a href="http://www.ecmtuning.com/images/forums/v3configs/stockbuilds/stock2g-3.18.205.ecm" class="urlextern" title="http://www.ecmtuning.com/images/forums/v3configs/stockbuilds/stock2g-3.18.205.ecm" rel="nofollow">stock2g-3.18.205.ecm</a> </td> </tr> <tr class="row3"> <td class="leftalign">1G v3.19.40 </td><td class="leftalign"><a href="http://www.ecmtuning.com/images/forums/v3configs/stockbuilds/stock1g-3.19.40.ecm" class="urlextern" title="http://www.ecmtuning.com/images/forums/v3configs/stockbuilds/stock1g-3.19.40.ecm" rel="nofollow">stock1g-3.19.40.ecm</a> </td> </tr> <tr class="row4"> <td class="leftalign">2G v3.19.40 </td><td class="leftalign"><a href="http://www.ecmtuning.com/images/forums/v3configs/stockbuilds/stock2g-3.19.40.ecm" class="urlextern" title="http://www.ecmtuning.com/images/forums/v3configs/stockbuilds/stock2g-3.19.40.ecm" rel="nofollow">stock2g-3.19.40.ecm</a> </td> </tr> <tr class="row5"> <td class="leftalign">1G v3.19.49 </td><td class="leftalign">No changes. Use <a href="http://www.ecmtuning.com/images/forums/v3configs/stockbuilds/stock1g-3.19.40.ecm" class="urlextern" title="http://www.ecmtuning.com/images/forums/v3configs/stockbuilds/stock1g-3.19.40.ecm" rel="nofollow">v3.19.40 file</a>. </td> </tr> <tr class="row6"> <td class="leftalign">2G v3.19.49 </td><td class="leftalign">No changes. Use <a href="http://www.ecmtuning.com/images/forums/v3configs/stockbuilds/stock2g-3.19.40.ecm" class="urlextern" title="http://www.ecmtuning.com/images/forums/v3configs/stockbuilds/stock2g-3.19.40.ecm" rel="nofollow">v3.19.40 file</a>. </td> </tr> </table> <span class='np_break'> </span> </div> </div>