v3configs
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
v3configs [2009/09/14 07:52] twdorris |
v3configs [2024/03/15 11:16] (current) |
||
|---|---|---|---|
| Line 2: | Line 2: | ||
| This page is a collection of tips and files for setting V3 up for a few common alternative configurations. | This page is a collection of tips and files for setting V3 up for a few common alternative configurations. | ||
| + | **V3Lite:** If you have the V3Lite package, you will want to use our [[v3liteconfigs|V3Lite configs page]] instead. | ||
| - | ===== EVO8 injectors ===== | + | **EVO8 settings:** The section that used to be here for EVO8 injectors has been moved to the more specific [[evo8v3settings|EVO8 V3 settings]] page. |
| - | If you're running EVO8 injectors with your ECMLink-equipped ECU, here are some numbers you can use to get the ECU configured to match identically with the EVO8 ECU itself. | + | |
| - | ==== Fuel Adjustments Table ==== | + | ===== Replacement Timing and Fuel tables ===== |
| - | In "ECU config" on the "Fuel" tab, set Global fuel to -17.6% and deadtime to 0 usecs. | + | |
| - | ==== InjBatteryAdj ==== | + | The following are a few sample OpenLoop and Tmng tables for use with ECMLink. To use these, simply open them with File->Open. That will bring up a direct access tab with only the data pulled from the opened file. Once you're there, you can hit the "Copy all to ECU" button to copy all the tables in the file into the ECU. These replace the underlying open loop target A/F ratio and timing tables. Remember, if you don't like them, you can always swap back to stock with the click of a toolbar button in the DirectAccess tab. |
| - | In the InjBatteryAdj table in direct access, set the table like so: | + | |
| - | ^Volts^usecs^ | + | ^Platform^File^Desc^ |
| - | | 7| 2235| | + | |Stock 1G DSM |[[https://www.ecmtuning.com/images/forums/v3configs/DSM-1G-stock.eda|DSM-1G-stock.eda]] |Stock 1993 1G DSM MT AWD | |
| - | | 9| 1380| | + | |Stock 2G DSM |[[https://www.ecmtuning.com/images/forums/v3configs/DSM-2G-stock.eda|DSM-2G-stock.eda]] |Stock 1995 2G DSM MT AWD | |
| - | | 12| 900| | + | |2003 USDM EVO8 |[[https://www.ecmtuning.com/images/forums/v3configs/EVO8-2003-stock.eda|EVO8-2003-stock.eda]] |Bone stock 2003 EVO8 - my own car | |
| - | | 14| 570| | + | |2003 USDM EVO8 (mod1) |[[https://www.ecmtuning.com/images/forums/v3configs/EVO8-2003-mod1.eda|EVO8-2003-mod1.eda]] |A slightly modified version of the 2003 EVO8 map that works a bit better on high boost/quick spool cars. | |
| - | | 16| 345| | + | |2004 EVO8 GSR Ralliart |[[https://www.ecmtuning.com/images/forums/v3configs/EVO8-2004-GSR-Ralliart.eda|EVO8-2004-GSR-Ralliart.eda]] |A rather aggressive tune. Review first! | |
| - | | 19| 195| | + | |
| Line 25: | Line 22: | ||
| - | ===== Replacement Timing and Fuel tables ===== | ||
| - | |||
| - | The following are a few sample OpenLoop and Tmng tables for use with ECMLink. To use these, simply open them with File->Open. That will bring up a direct access tab with only the data pulled from the opened file. Once you're there, you can hit the "Copy all to ECU" button to copy all the tables in the file into the ECU. These replace the underlying open loop target A/F ratio and timing tables. Remember, if you don't like them, you can always swap back to stock with the click of a toolbar button in the DirectAccess tab. | ||
| - | |||
| - | ^Platform^File^Desc^ | ||
| - | |Stock 1G DSM |[[http://www.ecmtuning.com/images/forums/v3configs/DSM-1G-stock.eda|DSM-1G-stock.eda]] |Stock 1993 1G DSM MT AWD | | ||
| - | |Stock 2G DSM |[[http://www.ecmtuning.com/images/forums/v3configs/DSM-2G-stock.eda|DSM-2G-stock.eda]] |Stock 1995 2G DSM MT AWD | | ||
| - | |2003 USDM EVO8 |[[http://www.ecmtuning.com/images/forums/v3configs/EVO8-2003-stock.eda|EVO8-2003-stock.eda]] |Bone stock 2003 EVO8 - my own car | | ||
| - | |2003 USDM EVO8 (mod1) |[[http://www.ecmtuning.com/images/forums/v3configs/EVO8-2003-mod1.eda|EVO8-2003-mod1.eda]] |A slightly modified version of the 2003 EVO8 map that works a bit better on high boost/quick spool cars. | | ||
| - | |2004 EVO8 GSR Ralliart |[[http://www.ecmtuning.com/images/forums/v3configs/EVO8-2004-GSR-Ralliart.eda|EVO8-2004-GSR-Ralliart.eda]] |A rather aggressive tune. Review first! | | ||
| ====== V3 Stock Builds ====== | ====== V3 Stock Builds ====== | ||
| This section includes a set of ECU Config files that represent a pure "stock" set of tables and values for each of the given releases. You can use these files to reset tables that you may have modified yourself and want to start over on. | This section includes a set of ECU Config files that represent a pure "stock" set of tables and values for each of the given releases. You can use these files to reset tables that you may have modified yourself and want to start over on. | ||
| - | Direct Access data already has a "reset to stock" function built-in because "stock" in that case is very clear. But ECU Config "stock" data is not so clear and may have slightly different values with each release. So these need to be handled differently. | + | **DIRECT ACCESS NOTE:** Direct Access data already has a "reset to stock" function built-in because "stock" in that case is very clear. But ECU Config "stock" data is not so clear and may have slightly different values with each release. So these need to be handled differently. |
| ===== How-to ===== | ===== How-to ===== | ||
| - | {{http://www.ecmtuning.com/images/forums/v3screenshots/fwversion.png }} | + | {{https://www.ecmtuning.com/images/forums/v3screenshots/fwversion.png }} |
| Bring up the ECMLink application and connect to your ECU. | Bring up the ECMLink application and connect to your ECU. | ||
| Line 52: | Line 39: | ||
| If you *only* want data from one table without everything else on that same tab, then right click in the table and select "copy table". That places a copy of that table data into the clipboard. Now, connect to your ECU and pull up the ECU Config tab where that table is located, right click again and select "paste table". | If you *only* want data from one table without everything else on that same tab, then right click in the table and select "copy table". That places a copy of that table data into the clipboard. Now, connect to your ECU and pull up the ECU Config tab where that table is located, right click again and select "paste table". | ||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| ===== Stock V3 ECU Config data files ===== | ===== Stock V3 ECU Config data files ===== | ||
| - | ^Firmware version^File^ | + | Information on changes included in each release can be found our [[v3firmwarechangelog|V3 Firmware Changelog page]]. |
| - | |1G v3.18.205 |[[http://www.ecmtuning.com/images/forums/v3configs/stockbuilds/stock1g-3.18.205.ecm|stock1g-3.18.205.ecm]] | | + | |
| + | **DIRECT ACCESS NOTE:** Direct Access data already has a "reset to stock" function built-in because "stock" in that case is very clear. But ECU Config "stock" data is not so clear and may have slightly different values with each release. The files below provide "stock" ECU Config data files for each release. They do not contain any direct access data. | ||
| + | |||
| + | ^Firmware version^File^Compatible versions^ | ||
| + | |1G v3.18.205 |[[https://www.ecmtuning.com/images/forums/v3configs/stockbuilds/stock1g-3.18.205.ecm|stock1g-3.18.205.ecm]] | | | ||
| + | |2G v3.18.205 |[[https://www.ecmtuning.com/images/forums/v3configs/stockbuilds/stock2g-3.18.205.ecm|stock2g-3.18.205.ecm]] | | | ||
| + | |1G v3.19.40 |[[https://www.ecmtuning.com/images/forums/v3configs/stockbuilds/stock1g-3.19.40.ecm|stock1g-3.19.40.ecm]] | Also for v3.19.49 | | ||
| + | |2G v3.19.40 |[[https://www.ecmtuning.com/images/forums/v3configs/stockbuilds/stock2g-3.19.40.ecm|stock2g-3.19.40.ecm]] | Also for v3.19.49 | | ||
v3configs.1252929149.txt.gz · Last modified: 2009/09/14 07:52 by twdorris
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
