Here we'll collect together a number of pieces and parts that you may need to install an ethanol sensor for use with ECMLink's flex fuel code. Since every car's setup is a little different, the parts you're going to need will be very specific to your setup. So if you find a part that you needed for your install that's not listed below, feel free to update this list (login info for edit access is the same as your ECMLink forum account) or send us an e-mail and we'll see about doing the update for you.

Image reference	Description
	GM Part # 13577429 - Basic sensor without mounting points. Pace Performance has it listed for less than $60 at the time of this writing.
	GM Part # 13577394 - Long line version with mounting points. Pace Performance has it listed for less than $90 at the time of this writing.
	GM Part # 13577379 - Short line version with mounting points. Pace Performance has it listed for less than $90 at the time of this writing.
	EFI Connection Part # 100-00741- Link Ballenger Motorsports Part # CONN-85750 - Link The connector is a Delphi 3-Cavity GT 150 Female Connector. You can find this connector w/pins and seals on various websites and/or a complete pigtail if you want to solder it into place. Both EFI Connection and Ballenger Motorsports provide pigtail or the individual parts. Mouser also carries the individual parts (not the assembled pigtail). Mouser part numbers are 13519047 (connector), 15326264 (pins) and 15366021 (seals).
	Summit Part # rus-640853 - Link Russell 6AN to 3/8 in Hard Tube Push-on EFI Fitting - Part# 640853​
	Autozone part # 800-085 - Link Dorman/3/8 in. steel to 5/16 in. nylon tubing fuel line quick connector