This is an old revision of the document!
You disable IAT compensation while running SD by setting the SDTempWeightingtable in direct access to all zero. This removes IAT compensation while retaining basic coolant-based compensation.
If you choose not to run an IAT sensor, then you only need a MAP sensor to run SD. We have two MAP sensors available on our website:
GM-style- Provides a general-purpose port-style nipple interface you can run a simple vacuum line to.
Mitsubishi-style- Mounts in place of a factory 2G MDP sensor on a factory 2G-style intake manifold.
Both are the same 4-bar sensor internally, so there's no decision there.