User Tools

Site Tools


v3litefirmwarechangelog

This is an old revision of the document!


ECMLink (V3Lite) Firmware Changelog

3.20.107 (03/16/2010)

  • Extended V3Lite functionality to include RPM-based fuel and timing tabs as well as the MAFComp tab required to use our automated MAF adjustment tool.

3.20.52 (01/25/2010)

  • Added support for 1G and 2G DSMs!

3.19.139 (12/23/2009)

  • Enhanced logging of various bit values (ECU pin inputs, etc.) to increase logging rate when viewing those items.
  • Changed logging of LoadFactor to increase log rate.
  • Released a new and improved AFRatioEst that makes using this critical log item even easier and more accurate, particularly with larger injectors at idle and even cruise conditions.
  • Adjusted MAF edge detection logic to be more accurate.

3.19.49 (09/17/2009)

  • Added support for extended timing and fuel tables. This increases both the size and resolution of the open loop fuel table and also increases the usable resolution on the timing table.
  • Adjusted the stock TmngMaxOct and TmngMinOct tables a bit to remove some of the goofiness defined by the factory on the highest load row.
  • To use this release, you MUST download and install at least version 3.19.49 of the laptop application first.

3.19.40 (09/08/2009)

  • Original release. Supports EVO1-3 ECUs. Some details here.
v3litefirmwarechangelog.1268735565.txt.gz · Last modified: 2010/03/16 06:32 by twdorris