Firmware upgrade page

This page is ONLY for the V3Lite package. If you have the full V3 package, you need to refer to the Full V3 Firmware Changelog instead.

• Added functionality to significantly reduce the chances of a sudden battery reset event from wiping out recent config changes.
• Added functionality to keep laptop application in sync with current configuration settings inside the ECU. This allows for super fast reconnects, but also allows for notification to the use when settings are changed unexpectedly.

• Fixes idle bug with 1G ECUs running stock MAF as their Base MAF type.

• Extended V3Lite functionality to include RPM-based fuel and timing tabs as well as the MAFComp tab required to use our automated MAF adjustment tool.

• Added support for 1G and 2G DSMs!

• Enhanced logging of various bit values (ECU pin inputs, etc.) to increase logging rate when viewing those items.
• Changed logging of LoadFactor to increase log rate.
• Released a new and improved AFRatioEst that makes using this critical log item even easier and more accurate, particularly with larger injectors at idle and even cruise conditions.
• Adjusted MAF edge detection logic to be more accurate.

• Added support for extended timing and fuel tables. This increases both the size and resolution of the open loop fuel table and also increases the usable resolution on the timing table.
• Adjusted the stock TmngMaxOct and TmngMinOct tables a bit to remove some of the goofiness defined by the factory on the highest load row.
• To use this release, you MUST download and install at least version 3.19.49 of the laptop application first.

• Original release. Supports EVO1-3 ECUs. Some details here.