User Tools

Site Tools


v3litefirmwarechangelog

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
v3litefirmwarechangelog [2018/02/10 09:28]
twdorris [3.33.114 (11/27/2016)]
v3litefirmwarechangelog [2018/02/10 09:28] (current)
twdorris [3.36.63(02/09/2018)]
Line 10: Line 10:
  
  
-===== 3.36.63(02/​09/​2018) =====+===== 3.36.63 (02/​09/​2018) =====
  
  
   * Added option to prime the fuel rail by running the fuel pump for some amount of time after key on. The option is located on the "ECU Config→Misc"​ tab. It should default to 0 seconds to simulate stock behavior and you should be able to increase this in half-second steps up to, I think, 30 seconds. When you turn the ignition key on, the pump should run for this many seconds as long as the ignition key is on. If you disrupt this time by turning the ignition key off, the pump should stop immediately and then restart the full prime time again when you next restore the key to the on position.   * Added option to prime the fuel rail by running the fuel pump for some amount of time after key on. The option is located on the "ECU Config→Misc"​ tab. It should default to 0 seconds to simulate stock behavior and you should be able to increase this in half-second steps up to, I think, 30 seconds. When you turn the ignition key on, the pump should run for this many seconds as long as the ignition key is on. If you disrupt this time by turning the ignition key off, the pump should stop immediately and then restart the full prime time again when you next restore the key to the on position.
- 
  
 ===== 3.33.114 (11/​27/​2016) ===== ===== 3.33.114 (11/​27/​2016) =====
v3litefirmwarechangelog.txt · Last modified: 2018/02/10 09:28 by twdorris