*** COVID 19: *** Please note that our ability to respond in order requests and questions has been greatly hampered by the stay-at-home order affecting our area. Since we technically qualify as an auto-repair facility which is exempt from these orders, we're still coming in but we're not coming in every single day. And to limit exposure further, we're not all here at the same time on the days we do operate. So please be patient with us as we work through all this. Orders will take longer to process, particularly ECU repairs. Please plan accordingly and thanks for your understanding.
We used to get these from Road Race Engineering. They always seem to have cool, unique stuff you can't find anywhere else. Unfortunately, they told us they couldn't provide us with a reliable source any more, so we decided to make our own.
Bolts into place of the factory MDP sensor on top of the stock 2G intake manifold. You can either screw in the included 1/4" x 1/8" NPT hose barb fitting and run a short vacuum hose to your boost sensor or directly connect an AEM boost sensor. In either case, use some teflon tape on the threads for a proper seal.
You must reuse your stock o-ring on this adapter.