Here's an awesome little 4-bar MAP sensor for logging boost or running speed density. It has all the fine electronics found inside our other OmniPower GM-style sensor, but this one is specifically designed to fit onto a 2G DSM or EVO8/9 manifold in place of the factory MDP sensor. It even plugs directly into the factory harness! No wiring or pigtails required. Once you have plugged this sensor into your harness, you just configure ECMLink for logging and/or running speed density and you're set.
For information on running speed density, see our SD Setup page. For information on configuring ECMLink for datalogging an aftermarket sensor, see our Captured Values demo video. In either case, this sensor is 100% compatible with the "Omnipower 4-bar" sensor listed in the ECMLink application.
The mating pigtail for this sensor can be found online by searching for a Standard Motor Products S745 pigtail. It's supposedly the same pigtail used for a 94 BMW 325 cam sensor, but we haven't been able to confirm that. Regardless, it's really rare for anyone to order this particular sensor and also need a pigtail since the sensor normally plugs into an existing factory MDP connector.